Search:

View Janitorial Products Index

Click Here for Ordering Instructions and Shipping Information

MRO Pictorial Index

Abrasives



Cutting Tools



Indexable Cutting Tools




Fasteners, Metals & Plastics



Fluids & Lubricants



Hand Tools



Machinery & Accessories



Material Handling



Power Tools



Precision Tools



Safety



Shop Supplies



Toolholding & Workholding



Tooling Components




Toolholding/Workholding - Machine Clamps


Bessey Clamps - Claw Machine Clamp 
Click Here for more information or to order
• Cantilever jaw for clamping in tight work areas with screw positioned outside of work area
• Full rotation through 360º radius for easier work setup and positioning outside of work area

Bessey Clamps - Rite Hite® Self-Positioning Hold Down Clamps 
Click Here for more information or to order
• Use on any machine with a T-slot
• Provides instant adjustment up to 5" and a 10,000 to 80,000 lbs. load limit
• Uses assorted stud sizes 3/8" to 1"
• Swivel rocker attached to base to prevent loss
• Clamps sold individually
• Studs not included
• MADE IN USA

James Morton Rite Hite Hold-Down Clamps
Click Here for more information or to order
  • No loose pieces to misplace.
  • Rocker locked on.
  • Cast steel, fully heat treated, instant set-up and self-positioning. Guaranteed stronger!
  • Use for milling, drilling, stamping, etc.
  • Use on any machine with a T-slot.
  • Studs and T-slot nuts are not included.





Jergens Clamps - Forged Adjustable Clamps 
Click Here for more information or to order
• Forged adjustable clamps automatically compensate for clamping height changes
• Swivel bushing permanently mounted in the clamp
• Brass heel plate protects the machine table
• Features a black oxide finish
• 1137 Forged steel, heat treated

Jergens Heavy-Duty Forged Strap Clamps - Finger Clamp 
Click Here for more information or to order

Jergens Heavy-Duty Forged Strap Clamps - Goose Neck Clamp 
Click Here for more information or to order

Jergens Heavy-Duty Forged Strap Clamps - Heel Clamp 
Click Here for more information or to order
NOTE: USA supplies head screw. Jergens does not include screw.

Jergens Heavy-Duty Forged Strap Clamps - U-Clamp 
Click Here for more information or to order

Jergens Strap Clamps - Coarse Pitch - Steel Heel Straps 
Click Here for more information or to order
• Step teeth match Jergens Aluminum Step Blocks
• Strap allows for easy height adjustment on setups when used with the help set adjustable step blocks
• Material: C-1018
• Heat treated case hardened
• Black oxide finish

Jergens Toe Clamps 
Click Here for more information or to order
• Low profile clamps grip on the side of the workpiece leaving the top surface open
• Features a minimal interference with cutting tools or measuring instruments
• Ideal for use on mills, planers, jig borers, drill presses, and faceplates
• Steel or brass toe and special washer are included with each clamp

Mitee-Bite - Gripping Rails 
Click Here for more information or to order
These gripping rails are excellent for holding non-ferrous material during grinding and milling on a magnetic chuck. Grinding stainless steel, brass, and plastic, while maintaining parallelism is easy with these new gripping rails.

Mitee-Bite - Machinable Uniforce Clamps 
Click Here for more information or to order
Now you can hold those round and unusual shape parts with ease. This compact method of workholding will allow more parts per load at a lower price that vise soft jaws.
The compact Mitee-Bite uniforce clamp is available with extra material on the clamping jaws so it can be machined to conform to the shape of your workpiece. The specially designed steel wedge spreads the clamping force uniformly on both sides of the 7075-T6 aluminum channel. A unique locking plate is provided to make the clamp rigid while machining the jaws to your specifications without vibration.
•Each is one Clamp Assembly with Locking Plate
•Mounting screws included

Mitee-Bite - Multi-Fixture Clamps & Stops 
Click Here for more information or to order
• All components made of hardened steel
• Cam action clamp provides positive down force
• Workpiece is elevated for thru milling & drilling
• Works in both plates with tapped hole layouts or T-slot configurations
• Tapered mounting slot prevents movement when clamping pressure is applied
• Provides flexible set-ups for hard to hold parts
• Can be mounted vertically or horizontally
• Stops locate workpiece for repeat positioning
• Larger sizes are ideal for mold shop applications

Mitee-Bite - Standard Duty Mono-Bloc Start-Up Kit 
Click Here for more information or to order
One of the fastest/strongest milling clamps. Start with two clamps and build up with risers. Clamps are easily set up and broken down making them ideal for odd-shaped parts and short cycle times. Worm-and-gear design ensures that the clamp will not loosen with use. Up to 12" clamping height with riser blocks.

Mitee-Bite - T-Slot Kits 
Click Here for more information or to order
• Locks in machine T-slot for low profile clamping
• Makes fast set-ups possible right on the machine table
• Brass hex follows contour of unusual shaped parts

Mitee-Bite ID Xpansion™ Clamps 
Click Here for more information or to order
The ID X-pansion™ Clamp is the ideal way to hold multiple parts on an inside diameter for machining on your VMC or HMC. These machinable clamps are produced in 10 sizes and can hold internal diameters from .160 to 4.050.

Mitee-Bite Pitbull™ Clamps 
Click Here for more information or to order
Use Pitbull™ Clamps and machine with confidence

Mitee-Bite Specialty Clamps - Compact Toe Clamps 
Click Here for more information or to order
• Cam action provides positive down force
• Install clamp base in a slot to retain location
• Clamps can be used in series
• Clamp base provides for higher clamping - height is determined by depth of slot
• Mounting screws included
• Available in 3 sizes

Mitee-Bite T-Slot Clamp Kits
Click Here for more information or to order
  • Locks in machine T-slot for low profile clamping.
  • Makes fast set-ups possible right on the machine table.
  • Brass hex follows contour of unusual shaped parts.

Kit includes:
  • 4 Mitee-Bite T-nuts.
  • 6 Mitee-Bite fixture clamps.
  • 2 Hex keys.





Mitee-Bite T-Slot Clamps
Click Here for more information or to order
  • Locks in machine T-slot for low profile clamping.
  • Makes fast set-ups possible right on the machine table.
  • Brass hex follows contour of unusual shaped parts.
  • Hex key not included.





Teco Strap Clamps 
Click Here for more information or to order
• Step Clamp teeth are matched to fit any size step block
• Heat treated steel
• Black penetrate finish
• MADE IN USA

Teco Toe Clamps - Standard Toe Clamps 
Click Here for more information or to order

XACT Clamps - Adjusta-Clamp Kit 
Click Here for more information or to order
Kit Features: 2 1/2 - 13 forged Adjusta-Clamps, 2 each T-Slot Bolts, in length of 3", 4", 5", 6", and our exclusive Rotary T-Slot Bolts, 1 each in lengths of 3", 4", 5", 6". All T-Slot Bolts and Rotary T-Slots have 1/2 - 13 threads and snugly fit 5/8" wide table slots. (For Bridgeport type milling machine tables). Accessory components include: 2 Springs, 4 Flange Nuts, and a handy holder, as shown. The Adjusta-Clamp Kit can take the place of space-consuming clamp kits that require step blocks, step clamps, t-slot nuts and studs.
• IMPORT

XACT Clamps - Economy Adapta-Clamp™ Kit 
Click Here for more information or to order
• Rapid height adjustment
• Pivot makes it easy to load and unload the workpiece
• Aluminum front and rear pads with four different faces (V-Shape, Serrated, Smooth, Rubber) to suit specific workholding applications
• Pads are replaceable
• IMPORT

XACT Clamps - Economy Adapta-Clamp™ 
Click Here for more information or to order
• Rapid height adjustment
• Pivot design makes it easy to load and unload the workpiece
• Aluminum front and rear pads with four different faces (V-Shape, Serrated, Smooth, Rubber) to suit specific workholding applications
• Pads are replaceable
• IMPORT

XACT Clamps - Forged Adjusta-Clamps 
Click Here for more information or to order
• 1 Piece assembly allows quick setups and eliminates lost clamp pieces
• Provides instant height adjustment without blocks or shims
• Removable brass shims protect machine table and work piece
• Swing clamp 90º in either direction for loading clearance
• Made of rugged forged steel
• IMPORT

XACT USA Made Heavy Duty Forged Strap Clamps - Finger Clamp 
Click Here for more information or to order

XACT USA Made Heavy Duty Forged Strap Clamps - Goose Neck Clamp 
Click Here for more information or to order

XACT USA Made Heavy Duty Forged Strap Clamps - Heel Clamp 
Click Here for more information or to order
NOTE: USA supplies head screw. Jergens does not include screw.

XACT USA Made Heavy Duty Forged Strap Clamps - U-Clamp 
Click Here for more information or to order

XACT USA Made Heavy-Duty Forged Strap Clamps - Finger Clamp 
Click Here for more information or to order

XACT USA Made Heavy-Duty Forged Strap Clamps - Goose Neck Clamp 
Click Here for more information or to order

XACT USA Made Heavy-Duty Forged Strap Clamps - Heel Clamp 
Click Here for more information or to order
NOTE: USA supplies head screw. Jergens does not include screw.

XACT USA Made Heavy-Duty Forged Strap Clamps - U-Clamp 
Click Here for more information or to order

XACT USA Made Toe Clamps - Small Toe Clamps 
Click Here for more information or to order
• MADE IN USA

XACT USA Made Toe Clamps - Toe Clamp Kits 
Click Here for more information or to order
Each Kit Contains:
• 6 Toe clamps - 2 of each length with low grip steel toe
• 6 Toe clamp nuts
• 6 Washers
• 1 T-Wrench
• 1 T-Slot cleaner
• 1 Handy holder
• MADE IN USA


Servicing Industry Since 1968

Have a Question or Need Technical Assistance? For Personal Service Click Here to contact a NSS dealer for your state.