Search:

View Janitorial Products Index

Click Here for Ordering Instructions and Shipping Information

MRO Pictorial Index

Abrasives



Cutting Tools



Indexable Cutting Tools




Fasteners, Metals & Plastics



Fluids & Lubricants



Hand Tools



Machinery & Accessories



Material Handling



Power Tools



Precision Tools



Safety



Shop Supplies



Toolholding & Workholding



Tooling Components




Toolholding/Workholding - Centers and Center Drivers - Royal


Royal N/C Spindle-Type Live Centers
Click Here for more information or to order
  • Designed for long life, heavy use, heavy loads and high thrust.
  • Good for up to 3000 RPM.
  • Specifically designed point provides tool clearance often needed on NC lathes.





Royal Products Bull Nose and Pipe Head Live Centers - Extra Heavy-Duty Bull Nose Live Centers 
Click Here for more information or to order
• ±.0002 TIR guaranteed
• Excellent for heavy tubes and parts with extra-large center holes
• Head diameters are 1/4" over nominal size enabling these centers to cover a wider range of workpieces
• Oversized tapered roller bearings combined with double-row radial provide very high load-carrying capabilities
• Bearings are protected from coolant and chips by a steel shield and neoprene seal
• Heat-treated, high carbon allow steel head for high wear resistance and long life
• MADE IN USA

Royal Products Bull Nose and Pipe Head Live Centers - Mini Pipe Head Live Centers 
Click Here for more information or to order
• ±.0001 TIR guaranteed
• Excellent for small and medium sized pipes, tubes, and hollow workpieces
• Close-fitting head eliminates seal, resulting in an extremely free-turning center
• Dual radial bearings for parts weighing up to 1,165 lbs.
• Thrust bearing provides high axial load capacities
• MADE IN USA

Royal Products Bull Nose and Pipe Head Live Centers - Pipe Head Live Centers 
Click Here for more information or to order
• ±.0001 TIR guaranteed
• Excellent for all types of pipes, tubes, and hollow workpieces and parts with extra-large center holes
• Head diameters are 1/8" over nominal size enabling these centers to cover a wider range of workpieces
• Two matched angular contact bearings provide solid thrust and radial load capacities
• Bearings are protected from coolant and chips by a steel shield and neoprene seal
• MADE IN USA

Royal Products Bull Nose and Pipe Head Live Centers - Standard Bull Nose Live Centers 
Click Here for more information or to order
• ±.0001 TIR guaranteed
• Excellent for small and medium sized pipes, tubes, and hollow workpieces and parts with extra-large center holes
• Head diameters are 1/8" over nominal size enabling these centers to cover a wider range of workpieces
• Two matched angular contact bearings provide solid thrust and radial load capacities
• Bearings are protected from coolant and chips by a steel shield and neoprene seal
• MADE IN USA

Royal Products High Speed N/C Quad-Bearing Live Centers - Steel or Carbide Tipped 
Click Here for more information or to order
• Accuracy: ± .0001" TIR guaranteed
• A true hich-speed center - up to 12,000 RPM
• Lubricated with lightweight spindle oil instead of grease
• Available in steel or carbide-tipped point
• 3 Matched angular contact bearings support the primary load area of the point and are secured with a locknut to form a rigid, preloaded assembly
• Sealed bearings
• Body is hardened for extra strength, extra rigidity and long life
• MADE IN USA

Royal Products Interchangeable Points for Bull Head Spring Type Live Centers 
Click Here for more information or to order
• ± .0001 TIR guaranteed
• Ultra low-profile body provides outstanding tool clearance
• Unique spring-loaded design compensates for thermal expansion of the workpiece by allowing the point to slide axially as the part grows
• A series of heavy disk springs keep the point firmly seated in the center-hole of the workpiece
• Dual roller bearings provide solid radial load capacities
• Axial loads are handled by a a special thrust bearing located between the point and springs
• Body and point are hardened for wear resistance and long life
• Bearings are protected from coolant and chips by a neoprene seal
• Available in multiple point styles to suit all applications
• MADE IN USA

Royal Products Interchangeable Threaded Point ToolmakerĘs Set 
Click Here for more information or to order
• Set consists of a Royal interchangeable-point live center with a complete set of 5 points that have been ground on this center and an extra standard male point
• These tool steel points are interchangeable to ± .0001"
• Wooden case with wrench
• MADE IN USA

Royal Products Live Centers - Versa-Turn 
Click Here for more information or to order
• ±0.0001" TIR guaranteed
• Great for general shop use on all manual lathes
• One of the most versatile centers ever made
• Unique combination point:
-Extended front section is used for parts with standard center holes and provides excellent tool clearance
-Rear bull head section is great for tubes and parts with larger center holes
• Thrust bearing provides high axial load capacity
• Dual radial bearings provide good workpiece weight capacities
• Close-fitting head eliminates seal, resulting in an extremely free-turning center
• MADE IN USA

Royal Products N/C Quad-Bearing Live Centers - Standard Point 
Click Here for more information or to order
• Accuracy: ± 0.0001"
• 3 Matched angular contact bearings plus one needle bearing
• The special spindle-like point extends into the shank where it is supported by a needle bearing
• Sealed bearings
• Point is high carbon alloy steel heat treated to Rc 61 - 63 specially designed to provide tool clearance
• Small point for extra clearance
• 3,000 RPM Maximum
• MADE IN USA

Royal Products N/C Spindle Type Live Centers - Standard Point 
Click Here for more information or to order
• Accuracy: ± 0.0001"
• The special spindle-like point extends into the shank where it is supported by a needle bearing
• Double-row angular contact bearing in front (single row on 2 and 3 Morse Taper)
• Thrust ball bearing to maximize thrust load capacity
• Sealed bearing
• Point is high-carbon alloy steel heat treated to Rc 61 - 63 and specially designed to provide tool clearance
• 3,000 RPM maximum
• Bearings permanently lubricated • Body is hardened for extra strength, extra rigidity and long life
• MADE IN USA

Royal Products N/C Threaded Dead Centers 
Click Here for more information or to order
• Accuracy: Runout between shank and point ± .0001"
• Solid dead center manufactured from high carbon alloy steel and heat treated to Rc 61 - 63
• Dead center is threaded so nut can be used to remove it from live tailstock in an N/C lathe
• Point is specially designed to provide tool clearance
• Carbide tipped ensures long point life
• MADE IN USA

Royal Products Quad-Bearing Extra Rigid Live Centers - Standard Point 
Click Here for more information or to order
• ±.0001 TIR guaranteed
• Excellent for grinders, manual lathes, and CNC lathes
• Three matched angular contact bearings support the primary load area of the point and are secured with a locknut to form a rigid, preloaded assembly
• This design is similar to many machine tool spindles and provides superior accuracy
• The point extends into the shank where it is supported by a needle roller bearing, which further increases rigidity, reduces point deflection, and dampens vibration
• Heavy-duty models are available in 5 and 6 MT sizes for very demanding jobs
• Hardened point and body provide extra strength and long life
• Bearings are protected from coolant and chips by a steel shield and neoprene seal
• Reduced knockout diameter prevents taper from mushrooming
• MADE IN USA

Royal Products Quad-Bearing Live Centers - Standard Point 
Click Here for more information or to order
• Excellent for medium/heavy-duty work on manual and CNC lathes and all grinders
• ± 0.0001" TIR guaranteed
• 3 Angular contact bearings and a needle roller bearing rigidly support the point. This design is similar to many machine tool spindles
• Accuracy and rigidity are maintained over a longer period of time with this bearing arrangement
• Low-profile head increases tool clearance
• Carbide tipped points also available
• MADE IN USA

Royal Products Spindle Type Heavy Duty Live Centers - Standard Point 
Click Here for more information or to order
• ±.0001 TIR guaranteed
• Excellent for medium/heavy-duty work on manual and CNC lathes
• A double-row front radial bearing (single-row on 1, 2, and 3MT) provides high radial load capacities for turning heavy parts
• Thrust bearing provides high axial load capacity
• Spindle-like point extends into the shank where it is supported by a needle roller bearing for increased rigidity and improved vibration dampening
• Hardened point and body provide extra strength , rigidity and long life
• MADE IN USA

Royal Products Spindle Type Live Centers - Standard Point 
Click Here for more information or to order
• Excellent for medium/heavy-duty work on manual and CNC lathes
• ± 0.0001" TIR guaranteed
• A double-row front radial bearing, (single-row on 1, 2, and 3 MT) and rear needle bearing support the spindle-like point
• A thrust bearing provides high axial load capacity
• The long spindle-like point increases rigidity and helps dampen vibration
• Carbide tipped points and other tapers available
• MADE IN USA

Royal Products Spindle Type Live Centers 
Click Here for more information or to order
• .0001" TIR guaranteed
• Excellent for grinding and high precision turning applications
• Solid centers are made of high speed steel and hardened to Rc 61-63 for excellent wear-resistance and long life
• Carbide-tipped models are made from high carbon alloy steel
• A regrind line shows the maximum allowable regrind range on the carbide-tipped models
• Half centers are relieved for grinding wheel clearance.
• MADE IN USA

Royal Products Spring Type Live Centers - Carbide-Tipped Model 
Click Here for more information or to order
• ± .0001 TIR guaranteed
• Ultra low-profile body provides outstanding tool clearance
• Unique spring-loaded design compensates for thermal expansion of the workpiece by allowing the point to slide axially as the part grows
• A series of heavy disk springs keep the point firmly seated in the center-hole of the workpiece
• Dual roller bearings provide solid radial load capacities
• Axial loads are handled by a a special thrust bearing located between the point and springs
• Body and point are hardened for wear resistance and long life
• Bearings are protected from coolant and chips by a neoprene seal
• Available in multiple point styles to suit all applications
• MADE IN USA

Royal Products Spring Type Live Centers - Extended CNC Point Model 
Click Here for more information or to order
• ± .0001 TIR guaranteed
• Ultra low-profile body provides outstanding tool clearance
• Unique spring-loaded design compensates for thermal expansion of the workpiece by allowing the point to slide axially as the part grows
• A series of heavy disk springs keep the point firmly seated in the center-hole of the workpiece
• Dual roller bearings provide solid radial load capacities
• Axial loads are handled by a a special thrust bearing located between the point and springs
• Body and point are hardened for wear resistance and long life
• Bearings are protected from coolant and chips by a neoprene seal
• Available in multiple point styles to suit all applications
• MADE IN USA

Royal Products Spring Type Live Centers - Interchangeable Bull Head Model 
Click Here for more information or to order
• ± .0001 TIR guaranteed
• Ultra low-profile body provides outstanding tool clearance
• Unique spring-loaded design compensates for thermal expansion of the workpiece by allowing the point to slide axially as the part grows
• A series of heavy disk springs keep the point firmly seated in the center-hole of the workpiece
• Dual roller bearings provide solid radial load capacities
• Axial loads are handled by a a special thrust bearing located between the point and springs
• Body and point are hardened for wear resistance and long life
• Bearings are protected from coolant and chips by a neoprene seal
• Available in multiple point styles to suit all applications
• MADE IN USA

Royal Products Spring Type Live Centers - Standard Steel Point Model 
Click Here for more information or to order
• ± .0001 TIR guaranteed
• Ultra low-profile body provides outstanding tool clearance
• Unique spring-loaded design compensates for thermal expansion of the workpiece by allowing the point to slide axially as the part grows
• A series of heavy disk springs keep the point firmly seated in the center-hole of the workpiece
• Dual roller bearings provide solid radial load capacities
• Axial loads are handled by a a special thrust bearing located between the point and springs
• Body and point are hardened for wear resistance and long life
• Bearings are protected from coolant and chips by a neoprene seal
• Available in multiple point styles to suit all applications
• MADE IN USA

Royal Products Super Quad-Bearing Live Centers - Extra Heavy-Duty 
Click Here for more information or to order
• Accuracy: ± .0001" TIR guaranteed
• Excellent for turning very heavy parts on manual and CNC lathes
• 3 oversized angular contact bearings support the primary load area of the point and are secured with a locknut to form a rigid, preloaded assembly
• This design is similar to many machine tool spindles and provides superior accuracy and rigidity
• The point extends into the shank where it is supported by a needle roller bearing; further increasing rigidity, reducing point deflection, and dampening vibration
• Hardened point and body provide extra strength and long life
• Bearings are protected from coolant and chips by a steel shield and neoprene seal
• Reduced knockout diameter prevents taper from mushrooming
• MADE IN USA

Royal Products TLC Live Centers - Standard Point - TLC = Tough Little Center 
Click Here for more information or to order
• ±.0001 TIR guaranteed
• This tough little center offers a great value for budget conscious machinists
• Short overhang and thick, stubby point combine to provide excellent rigidity
• The oversized double-row radial bearing provides high overall load ratings
• The needle roller bearing supports the rear of the point and provides additional rigidity, dampens vibration, and reduces point defection
• Body and point are hardened for wear resistance and long life
• MADE IN USA

Royal Products Value-Turn™ Live Centers 
Click Here for more information or to order
• ±.0001 TIR guaranteed
• Excellent for light/medium-duty work on manual lathes
• Dual radial bearings and a thrust bearing provide solid load ratings
• One-piece point/case is hardened for long life
• Sealed rear bearing protects assembly from coolant and chips
• MADE IN USA

Royal Super-Quad Extra Heavy-Duty Live Centers
Click Here for more information or to order
  • Excellent for very heavy-duty work on manual and CNC lathes.
  • +.0001" TIR guaranteed.
  • Three oversized angular contact bearings support the primary load area of the point.
  • Spindle-like point extends into the shank where it is supported by a needle roller bearing for increased rigidity and improved vibration dampening.





Royal Value-Turn Live Centers
Click Here for more information or to order
  • Excellent for light/medium work on manual lathes . +0.0001" TIR guaranteed.
  • Point has a 60° (+15' - 0) included point angle for correct center hole engagement.
  • Two radial ball bearings and a thrust bearing provide good overall load ratings.
  • Rotating point/case is hardened for wear resistance.
  • Rear bearing is sealed, protecting assembly from coolant and chips.
  • Reduced knockout diameter prevents taper from mushrooming.


Workpiece Capacity
Model #76510851 - 390 Lbs
Model #76510852 - 390 Lbs
Model #76510853 - 390 Lbs
Model #76510854 - 750 Lbs
Model #76510855 - 750 Lbs






Servicing Industry Since 1968

Have a Question or Need Technical Assistance? For Personal Service Click Here to contact a NSS dealer for your state.