Search:

View Janitorial Products Index

Click Here for Ordering Instructions and Shipping Information

MRO Pictorial Index

Abrasives



Cutting Tools



Indexable Cutting Tools




Fasteners, Metals & Plastics



Fluids & Lubricants



Hand Tools



Machinery & Accessories



Material Handling



Power Tools



Precision Tools



Safety



Shop Supplies



Toolholding & Workholding



Tooling Components




Precision Tools - Bore Gages


Click Here for more information or to order

Brown & Sharpe Alesotest Pistol Grip Bore Gages 

Self-aligning and self-centering bore gages with 3-line contact. Designed for measuring blind bores and through bores
• Built for strength-ideally suited for part series inspection on the production floor
• Can be used in conjunction with a mechanical or digital dial gage, or with an axial probe. Supplied with a 3/8" collet
• Supplied complete with digital inch/metric indicator

Click Here for more information or to order

Brown & Sharpe Dial Bore Gage Combination Kits 

• Industry's most popular dial bore gage now available in an easy-to-use combination kit
• Convenient carrying case
• Ideal for small shops or short production runs
• Inch .0001" dial graduation
• Metric .002 mm dial graduation

Click Here for more information or to order

Brown & Sharpe Dial Bore Gages - Centralizing-Plunger Type - Style 1 

Centralizing Plungers automatically locate the gaging contacts centrally on the bore diameter even when the gage is inserted at an angle.
• Dial indicator graduations: .0001"/.002 mm
• Complete with protective case
• Positive centralization

Click Here for more information or to order

Brown & Sharpe Intrimiks® - Intrimik® plus Digital Bore Gages 

Intrimik reads like a micrometer, making direct readings of bore diameters easy and accurate. Style A Intrimik's fixed measuring ranges eliminate the need for recalibrating the tool each time a new diameter is to be measured. Intrimik's 3 contact points are spaced 120º apart, ensuring proper centering and alignment - even in deep holes.

Click Here for more information or to order

Brown & Sharpe Rinseable Bore Gages 

Eliminate time spent cleaning bore gages. The Rinseable Bore Gage from Standard Gage can be cleaned without disassembly. The plunger mechanism is completely immersible, making it as easy to clean as it is to use.
• Balanced and lightweight for greater sensitivity and less operator fatigue
• Excellent stability in holding master value
• Tungsten carbide contacts
• Measuring range 2 - 8"/50 - 200 mm
• Indicator is shockproof, and is available in a choice of graduations
• Mechanism is protected by cast housing
• Extension housing is available in optional lengths to twelve feet

Click Here for more information or to order

Fowler Bore Gage Set

  • Easily adjustable and self centering.
  • Range: 2"-6".
  • Graduation: .0005".
  • Depth: 6".
  • Includes spacers, inter- changeable extensions and wooden case.





Click Here for more information or to order

Fowler Cylinder Bore Gages - 2 Point Bore Gage 

• Range 1/2" - 20" (12.5 mm - 500 mm)
• Choice of .0001", .0005" graduations
• Provides fast, simple checking of bores for size, ovality, taper, etc.
• Lightweight housing designed for extra strength and protection
• Thermally insulated for extra stability
• Tungsten carbide contact points for long life
• 5 YEAR WARRANTY

Click Here for more information or to order

Fowler Superbore System - 1.4" to 6" Bore Gage Set with Carbide Anvils 

• Carbide anvils
• Graduation: .0005"
• Insulated grip
• Chrome plated handle
• Includes all necessary spacers, interchangeable extensions
• Comes complete in a quality wooden case with custom fitted foam insert

Click Here for more information or to order

Fowler Superbore System - Bore Gage Sets 

• Carbide anvils
• Graduation: .0005"
• Insulated grip
• Chrome plated handle
• Easily adjustable, self centering
• Includes all necessary spacers and interchangeable extensions
• Complete in fitted case

Click Here for more information or to order

Fowler Superbore System 

• Ring gages from .315" (8 mm) - 9.45" (240 mm) meet Federal Class XX Specifications for accuracy
• Ring gages under .315" (8 mm) and over 10.24" (260 mm) meet Federal Class X Specifications for accuracy
• Ring gages are marked in inch and metric sizes
• 5 YEAR WARRANTY

Click Here for more information or to order

Mitutoyo Borematic 

• These new Digimatic instruments are designed to allow the operator to take multiple internal diameter readings quickly and accurately
• Easy-to-use, simply insert the measuring probe into a bore to be checked and release the handle
• Three self-aligning contact points snap open to meet the hole diameter and the digital display presents the reading with a resolution of 50 millionths (1 micron)

• Large, high-contrast LCD digital display
• Swivel face design and auxiliary control buttons so gage can be held and used at different angles
• Battery powered for portability
• SPC output
• Supplied with ring gage standards
• Optional extension rods available for measuring deep bore

Click Here for more information or to order

Mitutoyo Dial Bore Gages - Extensions 

• Designed to take the abuse of production line service
• May be used for large volume “go, no-go” inspections or for determination of actual dimensions
• Three point contact - two guide pins and one interchangeable rod - assure alignment within bore Zero point may be set with ring gage, micrometer, height master or gage blocks
• Shockproof jeweled with rev. counter
• Available with .0001", .0005", .01 mm or .001 mm
dial indicators
• Furnished with three adjusting wrenches
• Anvil with carbide tip available
• Self-centering
• Interchangeable rod accommodates size of bore

Click Here for more information or to order

Mitutoyo Dial Bore Gages - Replacement Heads 


Click Here for more information or to order

Mitutoyo Dial Bore Gages 

Features: (.3" to 7")
• Self-centering 2 points
• Repeatability to .0001"
• Anvils and measuring heads made of hardened steel
Features: (.7" to 6.2")
• Self-centering 3 points
• Repeatability to .0001"
• Add extension collar (MP1-01421D) for MT5-11162C; MT5-11166A extends range to 8"
• Add 10" extension to increase measuring depth: MP9-52361J for use with MT5-11185, MT5-11186, MT5-11188 and MT5-11189

Click Here for more information or to order

Mitutoyo Digimatic Bore Gage 

Mitutoyo introduces a new digimatic bore gage with the following features:
• .00012" (0.003 mm) or less wide range accuracy
• Anvil displacement is directly detected by the ultra compac built-in sensor (no mechanical transmitter is used)
• Maximum extension up to 78.74" (2000 mm)
• Reaches deep holes easily
• Simple to operate - can preset 3 reference (master) value and set upper/lower tolerance limits for each
• IP53 dust/water protection level

Click Here for more information or to order

SPI Deep Bore Gages

  • One gage does the work of several expensive gages.
  • Can reach 4" or 6" into a 1-1/4" bore.
  • Enters bores as small as .720" with 2-3/4" reach.





Click Here for more information or to order

SPI Hole-Mike Bore Micrometers

  • 3-Point micrometer for precise measurement of bore diameters.
  • Self aligning and self-centering.
  • Carbide measuring anvils.
  • Suitable to measure to within .050" of bottom of blind hole up to 4" capacity.
  • Setting frames are provided for diameter ranges above 4".
  • Individual setting rings available. Call for pricing.





Click Here for more information or to order

Starrett Dial Bore Gage Sets

  • Split-ball contact for rapid in-process and final inspection.
  • Graduation is .0001".
  • Interchangeable probes are hard chrome plated and polished.
  • Sets include dial indicator body and actuating rod and probes.





Click Here for more information or to order

Starrett Dial Bore Gages 

• Self-centering with direct readings to .0001" for rapid
in-process and final inspection
• Especially useful for controlling approach to tight tolerance range without removing workpieces from machine
• MADE IN USA

Click Here for more information or to order

Superbore System - Bore Gage Sets 

• Carbide anvils
• Graduation: .0005"
• Insulated grip
• Chrome plated handle
• Easily adjustable, self centering
• Includes all necessary spacers and interchangeable extensions
• Complete in fitted case

Click Here for more information or to order

XACT Dial Bore Gage Sets

  • .001" Graduation.
  • Reference chart in each set, indicating ring and rod sizes to select specific range.
  • Self centering.
  • Supplied with AGD group 2 dial indicators.
  • Includes fitted case.





Click Here for more information or to order

XACT Dial Bore Gage Sets 

• .0005" Graduations
• Complete with fitted case

Furnished with interchangeable anvils and necessary accessories to perform close tolerance I.D. measurements. The smallest range measurement is .24", the largest one is 16". The AGD Series 2 Dial Indicator furnished in each kit is a rugged top quality unit.


Servicing Industry Since 1968

Have a Question or Need Technical Assistance? For Personal Service Click Here to contact a NSS dealer for your state.