Search:

View Janitorial Products Index

Click Here for Ordering Instructions and Shipping Information

MRO Pictorial Index

Abrasives



Cutting Tools



Indexable Cutting Tools




Fasteners, Metals & Plastics



Fluids & Lubricants



Hand Tools



Machinery & Accessories



Material Handling



Power Tools



Precision Tools



Safety



Shop Supplies



Toolholding & Workholding



Tooling Components




Precision Tools - Angle and Sine Plates


Click Here for more information or to order

Avenger TIN Coated Precision Steel Angle Plates

  • 1 Piece solid steel construction.
  • Heat treated to 58 - 62 Rc.
  • Precision ground flat, square and parallel to within .0002".
  • 1/4-20 Tapped holes in all models for clamping uses.
  • Titanium Nitride coated for wear and corrosion resistance.
  • 2 Open and 1 stepped model available.





Click Here for more information or to order

Fowler Import Solid Angle Plate 

• Made of hardened steel
• 4 Holes for easy mounting
• Precision ground angles for convenient setups in tooling production and inspection

Click Here for more information or to order

Suburban Tool Angle Plates

  • High precision, solid one-piece steel construction.
  • Square and parallel to .0002".
  • 1/4" or 3/8" Tapped holes allow the use of standard, readily available accessories.
  • Sine system models bolt directly to sine system sine plates and compound sine plates of the same series.





Click Here for more information or to order

Suburban Tool Angle Plates - Compound Angle Plates 

• Solid 1 piece steel construction for longer life
• Hardened to Rc 58 - 62
• Ground flat, square and parallel within .0002"
• Features ground vees for convenient holding of small round parts
• Includes 1 clamp

Click Here for more information or to order

Suburban Tool Angle Plates - Cube Plates 

• Solid 1 piece steel construction for longer life
• Hardened to Rc 58 - 62
• Top, bottom and sides are ground flat, square and parallel within .0002"
• Slotted on all 4 sides for extra clamping possibilities

Click Here for more information or to order

Suburban Tool Angle Plates - Precision Angle Plates 

• Solid, 1 piece steel construction
• Hardened to Rc 58 - 62
• Ground flat, square and parallel to within .0002", except model AP 443 is .0001"
• Tapped holes are either 1/4 - 20 or 3/8 - 16 to use standard clamping accessories

Click Here for more information or to order

Suburban Tool Complete Sine Set® 

• STANDARD POLE - 1/4" Poles and 1/8" separators produce deep flux lines for holding large and thick parts
• FINEPOLE - 1/8" Poles and 1/8" separators produce shallow flux lines for holding small or thin parts
• Each set includes a Sine Set® sine plate or compound sine plate, magnetic chuck, a vise and an angle plate. The SS-0 sets also include a V-block
• Each set comes with all necessary locking straps, rails, handles, bolts, screws and washers, as well as the proper T-handle hex wrench
• Sets designated with a number ending in F include a fine pole magnetic chuck
• MADE IN USA

Click Here for more information or to order

Suburban Tool Compound Angle Sine Plates

  • A complete sine system through uniquely designed precision tools with "memory" holes.
  • All tools can be bolted on, parallel and perpendicular to the hinges, in a multitude of different ways, without clamps and with little or no indicating.
  • Tools can be used individually or in the sine system.
  • Made of quality steel, hardened to RC58-62.
  • Your selection of tools in the sine system includes: sine plates, compound sine plates, precision vises, sine vises, angle plates, magnetic chucks, whirligigs and V-blocks.
  • There are three different groups of sine systems to choose from, identified as S0, S1 and S2.
  • All tools within the same group are interchangable, i.e., S0 with S0, S1 with S1, and S2 with S2. All tools within the same group bolt directly to sine plates and compound sine plates of that group.





Click Here for more information or to order

Suburban Tool Compound Angle Sine Plates with Fine Pole Magnetic Chucks

  • A complete sine system through uniquely designed precision tools with "memory" holes.
  • All tools can be bolted on, parallel and perpendicular to the hinges, in a multitude of different ways, without clamps and with little or no indicating.
  • Tools can be used individually or in the sine system.
  • Made of quality steel, hardened to RC58-62.
  • Your selection of tools in the sine system includes: sine plates, compound sine plates, precision vises, sine vises, angle plates, magnetic chucks, whirligigs and V-blocks.
  • There are three different groups of sine systems to choose from, identified as S0, S1 and S2.
  • All tools within the same group are interchangable, i.e., S0 with S0, S1 with S1, and S2 with S2. All tools within the same group bolt directly to sine plates and compound sine plates of that group.
Fine Pole Features:
  • 1/8" Poles & 1/8" separators produce shallow flux lines for holding small and thin parts.
  • Chucks use ceramic magnets for superior holding power that never fades.
  • Sealed against dirt & liquids.
  • Side rail, back rail & two clamps included.





Click Here for more information or to order

Suburban Tool Compound Angle Sine Plates with Magnetic Chucks

  • A complete sine system through uniquely designed precision tools with "memory" holes.
  • All tools can be bolted on, parallel and perpendicular to the hinges, in a multitude of different ways, without clamps and with little or no indicating.
  • Tools can be used individually or in the sine system.
  • Made of quality steel, hardened to RC58-62.
  • Your selection of tools in the sine system includes: sine plates, compound sine plates, precision vises, sine vises, angle plates, magnetic chucks, whirligigs and V-blocks.
  • There are three different groups of sine systems to choose from, identified as S0, S1 and S2.
  • All tools within the same group are interchangable, i.e., S0 with S0, S1 with S1, and S2 with S2. All tools within the same group bolt directly to sine plates and compound sine plates of that group.
Standard Pole Features:
  • Produces deep flux lines for holding thick parts.
  • Ceramic magnets will not lose power.
  • Sealed against dirt & liquids.





Click Here for more information or to order

Suburban Tool Compound Sine Plates 

• Made of steel, hardened to Rc 58 - 62
• Models 6" x 6" or smaller have 1/4 - 20" tapped holes in the top plate. Larger models have 3/8 - 16 tapped holes
• Dual 0.200" minute steps for setting small angles with standard gage blocks are built into the gage block roll
• 1 Locking strap that always remain below the top surface is standard
• 2 Self-storing, hardened and ground rails are included
• MADE IN USA

Click Here for more information or to order

Suburban Tool Giant Slotted Angle Plates 

• Machined on outside faces and with cored slots arranged for maximum clamping versatility
• Made of quality closegrained cast iron, stress relieved against distortion by heat treatment
• Machined flat and square within .002" per 6"

Click Here for more information or to order

Suburban Tool Magnetic Compound Sine Plates 

• STANDARD POLE - 1/4" poles and 1/8" separators produce deep flux lines for holding large and thick parts
• FINE POLE - (marked-FP) - 1/8" poles and 1/8" separators produce shallow flux lines for holding small or thin parts
• All chucks use ceramic magnets for superior holding power that never fades
• All units are sealed against dirt and liquids
• Sine plate portion made of steel, hardened to Rc 58 - 62
• The magnetic chuck can be quickly removed or replaced on Sine Set® S0, S1 and S2 models, using only 4 bolts, allowing the individual use of both the sine plate and the magnetic chuck
• Chucks are removable except on SBK-00239D, SBK-00240D
• 1 Locking strap that always remains below the sine plate top surface is standard
• A removable handle and 2 rails are included for the magnetic chuck
• 2 Self-storing, hardened and ground rails are included for the sine plate on all Sine Set® models
• Dual .200" minute steps for setting small angles with standard gage blocks are built into the gage block roll
• Angular accuracy guaranteed within 5 seconds of arc up to 15º, within 10 seconds up to 30º and within 15 seconds up to 45º
• MADE IN USA

Click Here for more information or to order

Suburban Tool Magnetic Sine Plates 

• STANDARD POLE - 1/4" poles and 1/8" separators produce deep flux lines for holding large and thick parts
• FINE POLE - (marked-FP) - 1/8" poles and 1/8" separators produce shallow flux lines for holding small or thin parts
• All chucks use ceramic magnets for superior holding power that never fades
• All units are sealed against dirt and liquids
• Sine plate portion is made of steel, hardened to Rc 58 - 62
• The magnetic chuck can be quickly removed or replaced on Sine Set® S0, S1 and S2 models, using only 4 bolts, allowing the individual use of both the sine plate and the magnetic chuck
• Chucks are removable except on SBK-00236C
• Includes 1 locking strap that always remains below the sine plate top surface

Click Here for more information or to order

Suburban Tool Precision Angle Plates 

• With ample thickness and ribbed construction, these angle plates offer a versatile means of holding work for layout,
matching and inspection and are also widely used as vertical reference • Two finishes, Precision Ground and Machined

Click Here for more information or to order

Suburban Tool Sine Plates 

• Made of steel, hardened to Rc 58 - 62
• 2 Self-storing, hardened and ground rails are included
• One locking strap that always remains below the top surface is standard
• Dual 0.200" minute steps for setting small angles with standard gage blocks are built into the gage block roll
• Model SP-555 features 2 T-slots for 1/4" T-bolts
• Models 6" x 6" or smaller have 1/4 - 20" tapped holes in the top plate, Larger models have 3/8 - 16" tapped holes
• MADE IN USA

Click Here for more information or to order

Suburban Tool Single Angle Sine Plates

  • A complete sine system through uniquely designed precision tools with "memory" holes.
  • All tools can be bolted on, parallel and perpendicular to the hinges, in a multitude of different ways, without clamps and with little or no indicating.
  • Tools can be used individually or in the sine system.
  • Made of quality steel, hardened to RC58-62.
  • Your selection of tools in the sine system includes: sine plates, compound sine plates, precision vises, sine vises, angle plates, magnetic chucks, whirligigs and V-blocks.
  • There are three different groups of sine systems to choose from, identified as S0, S1 and S2.
  • All tools within the same group are interchangable, i.e., S0 with S0, S1 with S1, and S2 with S2. All tools within the same group bolt directly to sine plates and compound sine plates of that group.





Click Here for more information or to order

Suburban Tool Single Angle Sine Plates with Fine Pole Magnetic Chucks

  • A complete sine system through uniquely designed precision tools with "memory" holes.
  • All tools can be bolted on, parallel and perpendicular to the hinges, in a multitude of different ways, without clamps and with little or no indicating.
  • Tools can be used individually or in the sine system.
  • Made of quality steel, hardened to RC58-62.
  • Your selection of tools in the sine system includes: sine plates, compound sine plates, precision vises, sine vises, angle plates, magnetic chucks, whirligigs and V-blocks.
  • There are three different groups of sine systems to choose from, identified as S0, S1 and S2.
  • All tools within the same group are interchangable, i.e., S0 with S0, S1 with S1, and S2 with S2. All tools within the same group bolt directly to sine plates and compound sine plates of that group.
Fine Pole Features:
  • 1/8" Poles & 1/8" separators produce shallow flux lines for holding small and thin parts.
  • Chucks use ceramic magnets for superior holding power that never fades.
  • Sealed against dirt & liquids.
  • Side rail, back rail & two clamps included.





Click Here for more information or to order

Suburban Tool Single Angle Sine Plates with Magnetic Chucks

  • A complete sine system through uniquely designed precision tools with "memory" holes.
  • All tools can be bolted on, parallel and perpendicular to the hinges, in a multitude of different ways, without clamps and with little or no indicating.
  • Tools can be used individually or in the sine system.
  • Made of quality steel, hardened to RC58-62.
  • Your selection of tools in the sine system includes: sine plates, compound sine plates, precision vises, sine vises, angle plates, magnetic chucks, whirligigs and V-blocks.
  • There are three different groups of sine systems to choose from, identified as S0, S1 and S2.
  • All tools within the same group are interchangable, i.e., S0 with S0, S1 with S1, and S2 with S2. All tools within the same group bolt directly to sine plates and compound sine plates of that group.
Standard Pole Features:
  • Produces deep flux lines for holding thick parts.
  • Ceramic magnets will not lose power.
  • Sealed against dirt & liquids.





Click Here for more information or to order

Suburban Tool Slotted Angle Plates 

• Closed End have side webs and are actually machined square and parallel on outside faces and ends • Open End are accurately
machined square and parallel on all faces • Webbed Slotted has ribbed construction which provides sturdy support

Click Here for more information or to order

Suburban Tool Stepped Angle Plates - Optional Clamps for the AP-445 


Click Here for more information or to order

Suburban Tool Stepped Angle Plates 

• Solid, 1 piece construction for longer life
• Hardened to Rc 58 - 62
• Ground flat, square and parallel within .0002"
• The AP-445 is an extremely versatile angle plate with a vee, slots and a step for holding a wide variety of workpieces
• Optional face, yoke and side clamps for the AP-445 extend its usefulness even further

Click Here for more information or to order

Suburban Tool Universal Right Angle Irons 

• Can be used for fixture component as well as checking squareness and parallelism • All faces, ends and edges are finished square and parallel so that work can be clamped to either face and rotated through 3 planes without the need for repositioning • Supplied in 2 finishes

Click Here for more information or to order

Suburban Tool Vacuum Pumps 

• All models are oil-less, motor-mount, rotary vane design for maximum performance with minimum upkeep
• Each unit has internal muffler and filters. The filters were specifically designed to be easily removed and replaced
• Sealed, lubricated-for-life bearings require virtually no maintenance
• Pumps have built in thermal overload protection
• Each model includes a support base, the proper fittings and 6 feet of reinforced vacuum hose for use with our vacuum chucks
• MADE IN USA

Click Here for more information or to order

Suburban Tool Vacuum Sine Plate Chucks 

• Can be used alone or bolted directly with little or no indicating to a Sine Set® sine plate or compound sine plate S1, S2
• Provide an excellent means to hold non-magnetic workpieces for machining or grinding
• Includes 3 1/4" NPT holes for mounting vacuum gage, relief valve and hose
• Vacuum gage and relief hose provided
• 2 Side rails for positive location of workpieces are included
• MADE IN USA

Click Here for more information or to order

XACT Adjustable Angle Plates

  • Set up work at any angle during milling or other operations.
  • Heavy rugged graded casting.
  • Machined "T" slots.
  • Graduated 90 for setting 45 on each side.
  • Accuracy of table surface .005mm.





Click Here for more information or to order

XACT Adjustable Swivel Angle Plates

  • Heavy castings and rugged construction.
  • Graduation in degrees and 90 range.
  • 2 Screws lock setting.
  • Saves setup time.
  • Machine T-slots.





Click Here for more information or to order

XACT Angle Plates - Machined & Ground Finish

  • Machined finish square and parallel .002" per 6".
  • Ground finish square and parallel .0005" per 6" on 2 faces only.
  • Single Ribbed - 2" thru 6".
  • Double Ribbed - 8", 10" and 12".





Click Here for more information or to order

XACT Angle Plates 

• With ample thickness and ribbed construction, these angle plates offer a versatile means of holding work for layout,
matching and inspection and are also widely used as vertical reference • Two finishes, Precision Ground and Machined

Click Here for more information or to order

XACT Box Parallels

  • Made of high quality grained cast iron, stress relieved.
  • All faces and ends finished square and parallel.
  • Size tolerance +.002".
  • Ground square within .0005" per 6" and parallel within .00025" per 6".





Click Here for more information or to order

XACT Giant Slotted Angle Plates

  • Made from high grade seasoned semi-steel casting.
  • Clamping slots for easy mounting of workpieces.
  • Strong, ribbed construction.
  • Machined finish square and flat within .002" per 6".





Click Here for more information or to order

XACT Giant Slotted Angle Plates 

• Machined on outside faces and with cored slots arranged for maximum clamping versatility
• Made of quality closegrained cast iron, stress relieved against distortion by heat treatment
• Machined flat and square within .002" per 6"

Click Here for more information or to order

XACT Precision Steel Angle Plates

  • Solid one piece construction for longer life.
  • Hardened and ground to RC 58-62.
  • Ground within 0.0002".





Click Here for more information or to order

XACT Sine Plates

  • 0-60 Capacity.
  • Made of quality steel, hardened to 55-62 RC.
  • Squareness and parallelism within .0002".
  • Center distance of rolls within .0002".
  • Tapped holes in top plate.
  • Two hardened and ground side rails and one locking strap included.
  • Dist. rolls: 5".
  • Height: 2-1/2".





Click Here for more information or to order

XACT Slotted Angle Plates - Webbed & Open-End Type

  • Made of high quality fine grained cast iron, stress relieved.
  • Clamping slots for easy mounting of workpieces.
  • Webbed type-2 faces and all ends machined square and parallel within .001" per 6".
  • Open-end type-4 faces and all ends machined square and parallel within .002" per 6".





Click Here for more information or to order

XACT Slotted Angle Plates 

• Closed End have side webs and are actually machined square and parallel on outside faces and ends • Open End are accurately
machined square and parallel on all faces • Webbed Slotted has ribbed construction which provides sturdy support

Click Here for more information or to order

XACT Solid Angle Plate 

• Made of hardened steel
• 4 Holes for easy mounting
• Precision ground angles for convenient setups in tooling production and inspection

Click Here for more information or to order

XACT Universal Right Angle Irons - Machined & Ground Finish

  • Made of high quality fine grained cast iron, stress relieved.
  • All faces and ends finished square and parallel.
  • Size tolerance +.015".
  • Machined finish square and parallel .002" per 6".
  • Ground finish square within .0005" per 6", and parallel within .00025" per 6".





Click Here for more information or to order

XACT Universal Right Angle Irons 

• Can be used for fixture component as well as checking squareness and parallelism • All faces, ends and edges are finished square and parallel so that work can be clamped to either face and rotated through 3 planes without the need for repositioning • Supplied in 2 finishes


Servicing Industry Since 1968

Have a Question or Need Technical Assistance? For Personal Service Click Here to contact a NSS dealer for your state.