Search:

View Janitorial Products Index

Click Here for Ordering Instructions and Shipping Information

MRO Pictorial Index

Abrasives



Cutting Tools



Indexable Cutting Tools




Fasteners, Metals & Plastics



Fluids & Lubricants



Hand Tools



Machinery & Accessories



Material Handling



Power Tools



Precision Tools



Safety



Shop Supplies



Toolholding & Workholding



Tooling Components



Indexable Tooling - Carbide Inserts - XACT


XACT - Style TDAB, TPCB and TD6P 60º Triangle Screw-On Insert 
Click Here for more information or to order
• Use for small hole boring in a variety of materials
• 5º Positive rake
• Available in two quality grades

XACT - Style TDCG 60º Triangle Screw-On Insert 
Click Here for more information or to order
• Use for small hole boring in a variety of materials
• Right hand bars use left hand inserts
• Left hand bars use right hand inserts
• Available in two quality grades

XACT 4 in 1 Adjustable Slot Master® - Style CTA Insert 
Click Here for more information or to order
• Use for slotting, slab milling, straddled milling and half side milling
• Available in Weldon shank or arbor type
• All cutters are designed with an adjustable width and clamp-on inserts

XACT Boring Bars - Style TPGB 
Click Here for more information or to order
• Positive rake insert for turning, facing and boring
• Use on small machines
• Precision ground
• 10º Relief angle
• Single-sided insert
• Feed range: .003" to .012" IPR

XACT Boring Bars - Style TPGC-LF 
Click Here for more information or to order
• Positive rake insert for turning, facing and boring
• Use on small machines
• Precision ground
• 10º Relief angle
• Single-sided insert with precision ground chip control
• Feed range .003" to .012" IPR

XACT Carbide Insert Indexable 60º Dovetail Mills 
Click Here for more information or to order
• Features Weldon shanks
• Torx screw locking system
• To ensure repeatability, these cutters are designed with a precision machined allignment key that is integrated into each insert pocket
• Positive TDEX inserts with 15º clearance (sold seperately)
• Cutting rake +15º
• Axial rake +10º
• Radial Rake +14º
• MADE IN USA

XACT Carbide Inserts - Carbide Inserts for Countersink and Chamfering Tools 
Click Here for more information or to order
• Use for difficult-to-machine materials, long or thin walled parts
• Single-sided with chip control
• 11º Relief angle
• Feed range .005" to .015" IPR

XACT Carbide Inserts - CCMT - 80░ Diamond 7░ Positive With Chipbreaker - C-2
Click Here for more information or to order
  • Single-sided for semi-finishing and finishing.
  • Chip breaking in moderate range of feeds.
  • Positive cut, low cutting forces.
  • For a wide range of materials, soft materials and exotic alloys.
  • C-2 is a general purpose grade for all cast irons and nonferrous metals. It is superior on titanium, "K" Monel and bronze alloy i.e., aluminum bronze, manganese bronze, etc. It is an excellent general purpose grade.





XACT Carbide Inserts - CCMT - 80░ Diamond 7░ Positive With Chipbreaker - C-5
Click Here for more information or to order
  • Single-sided for semi-finishing and finishing.
  • Chip breaking in moderate range of feeds.
  • Positive cut, low cutting forces.
  • For a wide range of materials, soft materials and exotic alloys.
  • C-5 is a steel cutting grade with an outstanding balance of hardness and toughness. It excels in rough cutting of steels at high speeds. Highly resistant to thermal shock, it cuts the entire range of steels. It is superior in climb or facing milling and turning out of round or heavily scaled materials.





XACT Carbide Inserts - CCMT - 80░ Diamond 7░ Positive With Chipbreaker - TiN Coated
Click Here for more information or to order
  • Single-sided for semi-finishing and finishing.
  • Chip breaking in moderate range of feeds.
  • Positive cut, low cutting forces.
  • For a wide range of materials, soft materials and exotic alloys.
  • Tin coated grade on a tough, thermal resistant substrate. It is designed for milling steel at higher speeds with increased tool life.





XACT Carbide Inserts - CNMG - 80░ Diamond Negative With Molded Chipbreaker - C-2
Click Here for more information or to order
  • Double-sided for semi-roughing and roughing.
  • Chip breaking in feed range from .007 to .024 ipr.
  • For a wide range of materials and machining conditions.
  • Inserts with .094 in corner radius have special chipformer for heavy machining.
  • C-2 is a general purpose grade for all cast irons and nonferrous metals. It is superior on titanium, "K" Monel and bronze alloy i.e., aluminum bronze, manganese bronze, etc. It is an excellent general purpose grade.





XACT Carbide Inserts - CNMG - 80░ Diamond Negative With Molded Chipbreaker - C-5
Click Here for more information or to order
  • Double-sided for semi-roughing and roughing.
  • Chip breaking in feed range from .007 to .024 ipr.
  • For a wide range of materials and machining conditions.
  • Inserts with .094 in corner radius have special chipformer for heavy machining.
  • C-5 is a steel cutting grade with an outstanding balance of hardness and toughness. It excels in rough cutting of steels at high speeds. Highly resistant to thermal shock, it cuts the entire range of steels. It is superior in climb or facing milling and turning out of round or heavily scaled materials.





XACT Carbide Inserts - CNMG - 80░ Diamond Negative With Molded Chipbreaker - TiN Coated
Click Here for more information or to order
  • Double-sided for semi-roughing and roughing.
  • Chip breaking in feed range from .007 to .024 ipr.
  • For a wide range of materials and machining conditions.
  • Inserts with .094 in corner radius have special chipformer for heavy machining.
  • Tin coated grade on a tough, thermal resistant substrate. It is designed for milling steel at higher speeds with increased tool life.





XACT Carbide Inserts - CNMP - 80░ Diamond Negative 5░ Positive Chipbreaker - C-2
Click Here for more information or to order
  • Double-sided for semi-finishing and finishing.
  • Chip breaking in feed range from .004 to .016 in.
  • Positive cut (+5░).
  • Low cutting forces for machining soft materials and exotic alloys.
  • C-2 is a general purpose grade for all cast irons and nonferrous metals. It is superior on titanium, "K" Monel and bronze alloy i.e., aluminum bronze, manganese bronze, etc. It is an excellent general purpose grade.





XACT Carbide Inserts - CNMP - 80░ Diamond Negative 5░ Positive Chipbreaker - C-5
Click Here for more information or to order
  • Double-sided for semi-finishing and finishing.
  • Chip breaking in feed range from .004 to .016 in.
  • Positive cut (+5░).
  • Low cutting forces for machining soft materials and exotic alloys.
  • C-5 is a steel cutting grade with an outstanding balance of hardness and toughness. It excels in rough cutting of steels at high speeds. Highly resistant to thermal shock, it cuts the entire range of steels. It is superior in climb or facing milling and turning out of round or heavily scaled materials.





XACT Carbide Inserts - CNMP - 80░ Diamond Negative 5░ Positive Chipbreaker - TiN Coated
Click Here for more information or to order
  • Double-sided for semi-finishing and finishing.
  • Chip breaking in feed range from .004 to .016 in.
  • Positive cut (+5░).
  • Low cutting forces for machining soft materials and exotic alloys.
  • Tin coated grade on a tough, thermal resistant substrate. It is designed for milling steel at higher speeds with increased tool life.





XACT Carbide Inserts - DNMG - 55░ Diamond Negative With Molded Chipbreaker - C-2
Click Here for more information or to order
  • Double-sided for semi-roughing and roughing.
  • Chip breaking in feed range from .007 to .024 ipr.
  • For a wide range of materials and machining conditions.
  • C-2 is a general purpose grade for all cast irons and nonferrous metals. It is superior on titanium, "K" Monel and bronze alloy i.e., aluminum bronze, manganese bronze, etc. It is an excellent general purpose grade.





XACT Carbide Inserts - DNMG - 55░ Diamond Negative With Molded Chipbreaker - C-5
Click Here for more information or to order
  • Double-sided for semi-roughing and roughing.
  • Chip breaking in feed range from .007 to .024 ipr.
  • For a wide range of materials and machining conditions.
  • C-5 is a steel cutting grade with an outstanding balance of hardness and toughness. It excels in rough cutting of steels at high speeds. Highly resistant to thermal shock, it cuts the entire range of steels. It is superior in climb or facing milling and turning out of round or heavily scaled materials.





XACT Carbide Inserts - DNMG - 55░ Diamond Negative With Molded Chipbreaker - TiN Coated
Click Here for more information or to order
  • Double-sided for semi-roughing and roughing.
  • Chip breaking in feed range from .007 to .024 ipr.
  • For a wide range of materials and machining conditions.
  • Tin coated grade on a tough, thermal resistant substrate. It is designed for milling steel at higher speeds with increased tool life.





XACT Carbide Inserts - Indexable Boring Bar Inserts 
Click Here for more information or to order

XACT Carbide Inserts - RNMG - Round Negative With Molded Chipbreaker - C-2
Click Here for more information or to order
  • Double-sided inserts for general machining at medium feeds.
  • Suitable for straight turning ductile materials.
  • C-2 is a general purpose grade for all cast irons and nonferrous metals. It is superior on titanium, "K" Monel and bronze alloy i.e., aluminum bronze, manganese bronze, etc. It is an excellent general purpose grade.





XACT Carbide Inserts - RNMG - Round Negative With Molded Chipbreaker - C-5
Click Here for more information or to order
  • Double-sided inserts for general machining at medium feeds.
  • Suitable for straight turning ductile materials.
  • C-5 is a steel cutting grade with an outstanding balance of hardness and toughness. It excels in rough cutting of steels at high speeds. Highly resistant to thermal shock, it cuts the entire range of steels. It is superior in climb or facing milling and turning out of round or heavily scaled materials.





XACT Carbide Inserts - RNMG - Round Negative With Molded Chipbreaker - TiN Coated
Click Here for more information or to order
  • Double-sided inserts for general machining at medium feeds.
  • Suitable for straight turning ductile materials.
  • Tin coated grade on a tough, thermal resistant substrate. It is designed for milling steel at higher speeds with increased tool life.





XACT Carbide Inserts - SEAN - Square Positive With Chip Control - C-2
Click Here for more information or to order
  • Single-sided, with chip former.
  • Positive cut, low cutting forces.
  • C-2 is a general purpose grade for all cast irons and nonferrous metals. It is superior on titanium, "K" Monel and bronze alloy i.e., aluminum bronze, manganese bronze, etc. It is an excellent general purpose grade.





XACT Carbide Inserts - SEAN - Square Positive With Chip Control - C-5
Click Here for more information or to order
  • Single-sided, with chip former.
  • Positive cut, low cutting forces.
  • C-5 is a steel cutting grade with an outstanding balance of hardness and toughness. It excels in rough cutting of steels at high speeds. Highly resistant to thermal shock, it cuts the entire range of steels. It is superior in climb or facing milling and turning out of round or heavily scaled materials.





XACT Carbide Inserts - SEAN - Square Positive With Chip Control - TiN Coated
Click Here for more information or to order
  • Single-sided, with chip former.
  • Positive cut, low cutting forces.
  • Tin coated grade on a tough, thermal resistant substrate. It is designed for milling steel at higher speeds with increased tool life.





XACT Carbide Inserts - SNG - Square Negative Ground All Over - C-2
Click Here for more information or to order
  • Double-sided, without chipformer.
  • Suited to problem-free chip forming materials, i.e. cast iron.
  • C-2 is a general purpose grade for all cast irons and nonferrous metals. It is superior on titanium, "K" Monel and bronze alloy i.e., aluminum bronze, manganese bronze, etc. It is an excellent general purpose grade.





XACT Carbide Inserts - SNG - Square Negative Ground All Over - C-5
Click Here for more information or to order
  • Double-sided, without chipformer.
  • Suited to problem-free chip forming materials, i.e. cast iron.
  • C-5 is a steel cutting grade with an outstanding balance of hardness and toughness. It excels in rough cutting of steels at high speeds. Highly resistant to thermal shock, it cuts the entire range of steels. It is superior in climb or facing milling and turning out of round or heavily scaled materials.





XACT Carbide Inserts - SNG - Square Negative Ground All Over - TiN Coated
Click Here for more information or to order
  • Double-sided, without chipformer.
  • Suited to problem-free chip forming materials, i.e. cast iron.
  • Tin coated grade on a tough, thermal resistant substrate. It is designed for milling steel at higher speeds with increased tool life.





XACT Carbide Inserts - SNMG - Square Negative Molded Chipbreaker - C-2
Click Here for more information or to order
  • Double-sided for semi-roughing and roughing.
  • Chip breaking in feed range from .007 to .024 ipr.
  • For a wide range of materials and machining conditions.
  • C-2 is a general purpose grade for all cast irons and nonferrous metals. It is superior on titanium, "K" Monel and bronze alloy i.e., aluminum bronze, manganese bronze, etc. It is an excellent general purpose grade.





XACT Carbide Inserts - SNMG - Square Negative Molded Chipbreaker - C-5
Click Here for more information or to order
  • Double-sided for semi-roughing and roughing.
  • Chip breaking in feed range from .007 to .024 ipr.
  • For a wide range of materials and machining conditions.
  • C-5 is a steel cutting grade with an outstanding balance of hardness and toughness. It excels in rough cutting of steels at high speeds. Highly resistant to thermal shock, it cuts the entire range of steels. It is superior in climb or facing milling and turning out of round or heavily scaled materials.





XACT Carbide Inserts - SNMG - Square Negative Molded Chipbreaker - TiN Coated
Click Here for more information or to order
  • Double-sided for semi-roughing and roughing.
  • Chip breaking in feed range from .007 to .024 ipr.
  • For a wide range of materials and machining conditions.
  • Tin coated grade on a tough, thermal resistant substrate. It is designed for milling steel at higher speeds with increased tool life.





XACT Carbide Inserts - SNU - Square Negative Ground Top & Bottom - C-2
Click Here for more information or to order
  • Double-sided, without chipformer.
  • Suited to problem-free chip forming materials, i.e. cast iron.
  • C-2 is a general purpose grade for all cast irons and nonferrous metals. It is superior on titanium, "K" Monel and bronze alloy i.e., aluminum bronze, manganese bronze, etc. It is an excellent general purpose grade.





XACT Carbide Inserts - SNU - Square Negative Ground Top & Bottom - C-5
Click Here for more information or to order
  • Double-sided, without chipformer.
  • Suited to problem-free chip forming materials, i.e. cast iron.
  • C-5 is a steel cutting grade with an outstanding balance of hardness and toughness. It excels in rough cutting of steels at high speeds. Highly resistant to thermal shock, it cuts the entire range of steels. It is superior in climb or facing milling and turning out of round or heavily scaled materials.





XACT Carbide Inserts - SNU - Square Negative Ground Top & Bottom - TiN Coated
Click Here for more information or to order
  • Double-sided, without chipformer.
  • Suited to problem-free chip forming materials, i.e. cast iron.
  • Tin coated grade on a tough, thermal resistant substrate. It is designed for milling steel at higher speeds with increased tool life.





XACT Carbide Inserts - SPG - Square Positive Ground All Over - C-2
Click Here for more information or to order
  • Single-sided, with chipformer.
  • Positive cut, low cutting forces.
  • Suited to short chipping materials.
  • C-2 is a general purpose grade for all cast irons and nonferrous metals. It is superior on titanium, "K" Monel and bronze alloy i.e., aluminum bronze, manganese bronze, etc. It is an excellent general purpose grade.





XACT Carbide Inserts - SPG - Square Positive Ground All Over - C-5
Click Here for more information or to order
  • Single-sided, with chipformer.
  • Positive cut, low cutting forces.
  • Suited to short chipping materials.
  • C-5 is a steel cutting grade with an outstanding balance of hardness and toughness. It excels in rough cutting of steels at high speeds. Highly resistant to thermal shock, it cuts the entire range of steels. It is superior in climb or facing milling and turning out of round or heavily scaled materials.





XACT Carbide Inserts - SPG - Square Positive Ground All Over - TiN Coated
Click Here for more information or to order
  • Single-sided, with chipformer.
  • Positive cut, low cutting forces.
  • Suited to short chipping materials.
  • Tin coated grade on a tough, thermal resistant substrate. It is designed for milling steel at higher speeds with increased tool life.





XACT Carbide Inserts - Style ATPG 
Click Here for more information or to order
We offer a broad range of XACT insert styles and grades for all your turning, facing, chamfering and boring applications. High grade tungsten, carbide and cobalt are mixed to create these tough, long-lasting inserts. Add a premium coating and you've got an insert that will last and last. If you're looking for a great value, use our Performance Plus inserts. These inserts are offered with an aluminum oxide coating and a titanium nitride coating.
Super popular screw-on style inserts cut even your toughest materials. Try these inserts and you'll soon see why it's the fastest growing style in the U.S.

XACT Carbide Inserts - Style CCMT 
Click Here for more information or to order
We offer a broad range of XACT insert styles and grades for all your turning, facing, chamfering and boring applications. High grade tungsten, carbide and cobalt are mixed to create these tough, long-lasting inserts. Add a premium coating and you've got an insert that will last and last. If you're looking for a great value, use our Performance Plus inserts. These inserts are offered with an aluminum oxide coating and a titanium nitride coating.
Super popular screw-on style inserts cut even your toughest materials. Try these inserts and you'll soon see why it's the fastest growing style in the U.S.

XACT Carbide Inserts - Style CNMA 
Click Here for more information or to order
We offer a broad range of XACT insert styles and grades for all your turning, facing, chamfering and boring applications. High grade tungsten, carbide and cobalt are mixed to create these tough, long-lasting inserts. Add a premium coating and you've got an insert that will last and last. If you're looking for a great value, use our Performance Plus inserts. These inserts are offered with an aluminum oxide coating and a titanium nitride coating.
Super popular screw-on style inserts cut even your toughest materials. Try these inserts and you'll soon see why it's the fastest growing style in the U.S.

XACT Carbide Inserts - Style CNMG 
Click Here for more information or to order
• Combination pin and clamp
• Chip control both sides
• 0º Relief angle
• Feed range .010" to .028" IPR

XACT Carbide Inserts - Style CNMG-B 
Click Here for more information or to order
• Chip control both sides
• 0º Relief angle
• Feed range .008" to .018" IPR

XACT Carbide Inserts - Style CNMM 
Click Here for more information or to order
• Single sided with chip control
• 0º Relief angle
• Feed range .015" to .038" IPR

XACT Carbide Inserts - Style CNMP 
Click Here for more information or to order
• Use this 5º positive insert for hard-to-machine materials
• 5º Positive cutting action
• 0º Relief angle
• Feed range .005" to .012" IPR

XACT Carbide Inserts - Style CPG 
Click Here for more information or to order
• Use for turning, facing, boring and milling
• Use for difficult-to-machine material, long or thin walled parts
• Use mechanical chipbreaker C43 style for chip control in turning applications
• 11º Relief angle
• Feed range .003" to .020" IPR

XACT Carbide Inserts - Style CPMT 
Click Here for more information or to order
• Use for boring and facing - works great on all machine types
• Our most popular screw-on insert style
• Single-sided insert with molded chip control
• 11º Relief angle
• Feed range .003" to .015" IPR

XACT Carbide Inserts - Style DCMT 
Click Here for more information or to order
• Use for turning, facing, profiling and finish cuts
• Single-sided insert with molded chip control
• 7º Relief angle
• Feed range .003" to .012" IPR

XACT Carbide Inserts - Style DNGA 
Click Here for more information or to order
• Use this insert in interrupted cuts while turning, facing and profiling
• Precision ground on all sides
• 0º Relief angle
• Feed range .003" to .015" IPR

XACT Carbide Inserts - Style DNMG 
Click Here for more information or to order
• Use for profiling, finish, turning and facing
• Molded chip control on both sides
• 0º Relief angle
• Feed range: .010" to .030" IPR

XACT Carbide Inserts - Style DNMG-B 
Click Here for more information or to order
• Use for profiling, finish turning and facing
• Molded chip control on both sides
• 0º Relief angle
• Feed range: .005" to .015" IPR

XACT Carbide Inserts - Style DNMM 
Click Here for more information or to order
• Single-sided with chip control
• 0º Relief angle
• Feed range: .015" to .038" IPR

XACT Carbide Inserts - Style DNMP 
Click Here for more information or to order
• Use for profiling, finish turning and facing
• Use for difficult-to-machine materials
• Double-sided with molded chip control
• 0º Relief angle, 10º positive cutting action
• Feed range: .008" to .020" IPR

XACT Carbide Inserts - Style DPMT 
Click Here for more information or to order
We offer a broad range of XACT insert styles and grades for all your turning, facing, chamfering and boring applications. High grade tungsten, carbide and cobalt are mixed to create these tough, long-lasting inserts. Add a premium coating and you've got an insert that will last and last. If you're looking for a great value, use our Performance Plus inserts. These inserts are offered with an aluminum oxide coating and a titanium nitride coating.
Super popular screw-on style inserts cut even your toughest materials. Try these inserts and you'll soon see why it's the fastest growing style in the U.S.

XACT Carbide Inserts - Style ITT 60º Triangle 
Click Here for more information or to order
We offer a broad range of XACT insert styles and grades for all your turning, facing, chamfering and boring applications. High grade tungsten, carbide and cobalt are mixed to create these tough, long-lasting inserts. Add a premium coating and you've got an insert that will last and last. If you're looking for a great value, use our Performance Plus inserts. These inserts are offered with an aluminum oxide coating and a titanium nitride coating.
Super popular screw-on style inserts cut even your toughest materials. Try these inserts and you'll soon see why it's the fastest growing style in the U.S.


XACT Carbide Inserts - Style ITT 
Click Here for more information or to order
We offer a broad range of XACT insert styles and grades for all your turning, facing, chamfering and boring applications. High grade tungsten, carbide and cobalt are mixed to create these tough, long-lasting inserts. Add a premium coating and you've got an insert that will last and last. If you're looking for a great value, use our Performance Plus inserts. These inserts are offered with an aluminum oxide coating and a titanium nitride coating.
Super popular screw-on style inserts cut even your toughest materials. Try these inserts and you'll soon see why it's the fastest growing style in the U.S.


XACT Carbide Inserts - Style KNUX 
Click Here for more information or to order
We offer a broad range of XACT insert styles and grades for all your turning, facing, chamfering and boring applications. High grade tungsten, carbide and cobalt are mixed to create these tough, long-lasting inserts. Add a premium coating and you've got an insert that will last and last. If you're looking for a great value, use our Performance Plus inserts. These inserts are offered with an aluminum oxide coating and a titanium nitride coating.
Super popular screw-on style inserts cut even your toughest materials. Try these inserts and you'll soon see why it's the fastest growing style in the U.S.

XACT Carbide Inserts - Style RCMM 
Click Here for more information or to order
• Use for turning and facing on the outside of the part
• Single-sided insert with molded chip control
• 7º Relief angle
• Feed range: .005" to .018" IPR

XACT Carbide Inserts - Style RCMT 
Click Here for more information or to order
• Use for turning and facing - works great for all machine types
• Single-sided insert with molded chip control
• 7º Relief angle
• Feed range: .005" to .020" IPR

XACT Carbide Inserts - Style RD 
Click Here for more information or to order
• Use for turning and facing on the outside of the part
• Single-sided insert
• 6º Relief angle
• Feed range: .003" to .012" IPR

XACT Carbide Inserts - Style RNG 
Click Here for more information or to order
• Use for turning and facing on the outside of the part
• Use for rigid setups
• Double-sided clamp style insert
• 0º Relief angle
• Precision ground all over

XACT Carbide Inserts - Style RNMA 
Click Here for more information or to order
• Use for turning and facing on the outside of the part
• Great for rigid set ups
• 0º Relief angle
• Feed range: .003" to .030" IPR

XACT Carbide Inserts - Style RNMG 
Click Here for more information or to order
• Chip control both sides
• Feed range: .010" to .030" IPR

XACT Carbide Inserts - Style RPG 
Click Here for more information or to order
• 11º Relief angle
• Precision ground all over
• Feed range: .003" to .020" IPR

XACT Carbide Inserts - Style SCMT 
Click Here for more information or to order
• 7º Relief angle
• Feed range: .005" to .015" IPR

XACT Carbide Inserts - Style SNG for Indexable Milling Cutters 
Click Here for more information or to order
• Use for turning, facing and boring
• Eight cutting edges
• Use a mechanical chipbreaker CBS for chip control in turning applications
• 0º Relief angle precision ground
• Feed range: .003" to .030" IPR

XACT Carbide Inserts - Style SNG 
Click Here for more information or to order
• Use for turning, facing and boring
• Eight cutting edges
• Use a mechanical chipbreaker CBS for chip control in turning applications
• 0º Relief angle precision ground
• Feed range: .003" to .030" IPR

XACT Carbide Inserts - Style SNMA 
Click Here for more information or to order
• Use for turning, facing and boring in cast iron materials
• Ground top and bottom
• 0º Relief angle
• Feed range: .003" to .030" IPR

XACT Carbide Inserts - Style SNMG 
Click Here for more information or to order
We offer a broad range of XACT insert styles and grades for all your turning, facing, chamfering and boring applications. High grade tungsten, carbide and cobalt are mixed to create these tough, long-lasting inserts. Add a premium coating and you've got an insert that will last and last. If youĂre looking for a great value, use our Performance Plus inserts. These inserts are offered with an aluminum oxide coating and a titanium nitride coating.
Super popular screw-on style inserts cut even your toughest materials. Try these inserts and youĂll soon see why itĂs the fastest growing style in the U.S.

XACT Carbide Inserts - Style SNMG-P 
Click Here for more information or to order
• Use for turning, facing and boring
• Chip control both sides
• 0º Relief angle
• Feed range: .010" to .028" IPR

XACT Carbide Inserts - Style SNMM 
Click Here for more information or to order
We offer a broad range of XACT insert styles and grades for all your turning, facing, chamfering and boring applications. High grade tungsten, carbide and cobalt are mixed to create these tough, long-lasting inserts. Add a premium coating and you've got an insert that will last and last. If youĂre looking for a great value, use our Performance Plus inserts. These inserts are offered with an aluminum oxide coating and a titanium nitride coating.
Super popular screw-on style inserts cut even your toughest materials. Try these inserts and youĂll soon see why itĂs the fastest growing style in the U.S.

XACT Carbide Inserts - Style SNMP 
Click Here for more information or to order
• Use for turning, facing and boring - great for difficult-to-machine materials
• Chip control on both sides
• 0º Relief angle
• Feed range .008" to .015" IPR

XACT Carbide Inserts - Style SNU for Indexable Milling Cutters 
Click Here for more information or to order
• Use for turning and facing on the outside of the part
• Use a CBS style chipbreaker for chip control in turning applications
• 0º Relief angle
• Feed range .003" to .030" IPR
• Eight cutting edges

XACT Carbide Inserts - Style SNU 
Click Here for more information or to order
• Use for turning and facing on the outside of the part
• Use a CBS style chipbreaker for chip control in turning applications
• 0º Relief angle
• Feed range .003" to .030" IPR
• Eight cutting edges

XACT Carbide Inserts - Style SPC for Indexable Milling Cutters 
Click Here for more information or to order
• Use for milling in a variety of materials
• 11º Relief angle
• Precision ground insert
• 45º Lead angle

XACT Carbide Inserts - Style SPG Carbide Inserts 
Click Here for more information or to order
• Use for difficult-to-machine materials, long or thin walled parts
• Single-sided, clamp-on insert
• Use mechanical chipbreaker CBS style for chip control in turning applications
• 11º Relief angle
• Precision ground all over

XACT Carbide Inserts - Style SPG for Indexable Milling Cutters 
Click Here for more information or to order
• Use for difficult-to-machine materials, long or thin walled parts
• Single-sided, clamp-on insert
• Use mechanical chipbreaker CBS style for chip control in turning applications
• 11º Relief angle
• Precision ground all over

XACT Carbide Inserts - Style SPG 
Click Here for more information or to order
• Use for difficult-to-machine materials, long or thin walled parts
• Single-sided, clamp-on insert
• Use mechanical chipbreaker CBS style for chip control in turning applications
• 11º Relief angle
• Precision ground all over

XACT Carbide Inserts - Style SPGH 
Click Here for more information or to order
• Use for difficult-to-machine materials, long or thin walled parts
• Single-sided with chip control
• 11º Relief angle
• Feed range .005" to .015" IPR

XACT Carbide Inserts - Style SPMR 
Click Here for more information or to order
• Use for difficult-to-machine materials, long or thin walled parts
• Single-sided with molded chip control
• 11º Relief angle
• Feed range .003" to .012" IPR

XACT Carbide Inserts - Style SPMT 
Click Here for more information or to order
• Use for turning and facing - works great on all machine types
• Single-sided insert with chip control
• 11º Relief angle
• Feed range .005" to .015" IPR

XACT Carbide Inserts - Style SPU 
Click Here for more information or to order
• Use for difficult-to-cut materials, long or thin walled parts
• Use mechanical chip-breaker CBS style for chip control in turning applications
• 11º Relief angle
• Precision ground top and bottom
• Feed range .003" to .020" IPR

XACT Carbide Inserts - Style TCMT 
Click Here for more information or to order
• Use for turning and facing - works great on all machine types
• Single-sided insert with chip control
• 7º Relief angle
• Feed range .005" to .015" IPR

XACT Carbide Inserts - Style TD 
Click Here for more information or to order
• Precision ground
• 11º Positive rake
• Feed range .010" to .030" IPR

XACT Carbide Inserts - Style TEGE 
Click Here for more information or to order
We offer a broad range of XACT inserts styles and grades for all your turning, facing, chamfering and boring applications. High grade tungsten, carbide and cobalt are mixed to create these tough, long-lasting inserts. Add a premium coating and you've got an insert that will last and last. If youĂre looking for a great value, use our Performance Plus inserts. These inserts are offered with an aluminum oxide coating and a titanium nitride coating.

Super popular screw-on style inserts cut even your toughest materials. Try these inserts and youĂll soon see why itĂs the fastest growing sytle in the US.

XACT Carbide Inserts - Style TFG 
Click Here for more information or to order
We offer a broad range of XACT inserts styles and grades for all your turning, facing, chamfering and boring applications. High grade tungsten, carbide and cobalt are mixed to create these tough, long-lasting inserts. Add a premium coating and you've got an insert that will last and last. If youĂre looking for a great value, use our Performance Plus inserts. These inserts are offered with an aluminum oxide coating and a titanium nitride coating.

Super popular screw-on style inserts cut even your toughest materials. Try these inserts and youĂll soon see why itĂs the fastest growing sytle in the US.

XACT Carbide Inserts - Style TNG 
Click Here for more information or to order
We offer a broad range of XACT inserts styles and grades for all your turning, facing, chamfering and boring applications. High grade tungsten, carbide and cobalt are mixed to create these tough, long-lasting inserts. Add a premium coating and you've got an insert that will last and last. If youĂre looking for a great value, use our Performance Plus inserts. These inserts are offered with an aluminum oxide coating and a titanium nitride coating.

Super popular screw-on style inserts cut even your toughest materials. Try these inserts and youĂll soon see why itĂs the fastest growing sytle in the US.

XACT Carbide Inserts - Style TNMA 
Click Here for more information or to order
• Use for interrupted cuts
• 0º Relief angle
• Feed range: .005" to 020" IPR

XACT Carbide Inserts - Style TNMG 60º Triangle Insert 
Click Here for more information or to order
• Use for turning, facing and boring on rigid setups
• Molded chipbreaker - both sides
• Feed range: .008" to .025" IPR

XACT Carbide Inserts - Style TNMG 
Click Here for more information or to order
• Use for turning, facing and boring on rigid setups
• Molded chipbreaker - both sides
• Feed range: .008" to .025" IPR

XACT Carbide Inserts - Style TNMG-B 
Click Here for more information or to order
• 5º Positive cutting action improves tool life and is well suited for stainless steel and difficult-to- machine material
• Use for turning, facing and boring on rigid setups
• Molded chipbreaker on both sides
• Feed range: .008" to .020" IPR

XACT Carbide Inserts - Style TNMM 
Click Here for more information or to order
• Single-sided with chip control
• 0º Relief angle
• Feed range: .015" to .038" IPR
• Maximum feed rate

XACT Carbide Inserts - Style TNMP 
Click Here for more information or to order
• 5º Positive cutting action
• Use for cutting difficult-to-machine materials
• Molded chipbreaker on both sides
• 0º Relief angle
• Feed range: .003" to .020" IPR

XACT Carbide Inserts - Style TNU 
Click Here for more information or to order
• Use for turning and facing on rigid setups
• Ground top and bottom
• 0º Relief angle
• Feed range: .003" to .028" IPR

XACT Carbide Inserts - Style TP 
Click Here for more information or to order
• Positive rake insert for boring and facing
• Use for boring in small diameter holes
• Precision ground
• 10º Relief angle
• Single-sided insert
• Feed range: .003" to .012" IPR

XACT Carbide Inserts - Style TPC 
Click Here for more information or to order
• Use for face and end milling
• Clamp-on insert
• Available in three grades

XACT Carbide Inserts - Style TPEE / TPG Carbide Inserts 
Click Here for more information or to order
• Use for boring
• Clamp-on insert
• Available in three grades


XACT Carbide Inserts - Style TPEE 
Click Here for more information or to order
We offer a broad range of XACT insert styles and grades for all your turning, facing, chamfering and boring applications. High grade tungsten, carbide and cobalt are mixed to create these tough, long-lasting inserts. Add a premium coating and you've got an insert that will last and last. If youĂre looking for a great value, use our Performance Plus inserts. These inserts are offered with an aluminum oxide coating and a titanium nitride coating.

Super popular screw-on style inserts cut even your toughest materials. Try these inserts and youĂll soon see why itĂs the fastest growing style in the U.S.


XACT Carbide Inserts - Style TPG 60º Triangle Clamp-On Inserts 
Click Here for more information or to order
We offer a broad range of XACT insert styles and grades for all your turning, facing, chamfering and boring applications. High grade tungsten, carbide and cobalt are mixed to create these tough, long-lasting inserts. Add a premium coating and you've got an insert that will last and last. If youĂre looking for a great value, use our Performance Plus inserts. These inserts are offered with an aluminum oxide coating and a titanium nitride coating.

Super popular screw-on style inserts cut even your toughest materials. Try these inserts and youĂll soon see why itĂs the fastest growing style in the U.S.


XACT Carbide Inserts - Style TPG 60º Triangle Insert 
Click Here for more information or to order
• Use for face milling in a variety of materials
• Positive cutting action reduces cutting forces and improves tool life
• Available in three grades


XACT Carbide Inserts - Style TPG Inserts 
Click Here for more information or to order
We offer a broad range of XACT insert styles and grades for all your turning, facing, chamfering and boring applications. High grade tungsten, carbide and cobalt are mixed to create these tough, long-lasting inserts. Add a premium coating and you've got an insert that will last and last. If youĂre looking for a great value, use our Performance Plus inserts. These inserts are offered with an aluminum oxide coating and a titanium nitride coating.

Super popular screw-on style inserts cut even your toughest materials. Try these inserts and youĂll soon see why itĂs the fastest growing style in the U.S.


XACT Carbide Inserts - Style TPG 
Click Here for more information or to order
• Use for face milling in a variety of materials
• Positive cutting action reduces cutting forces and improves tool life
• Available in three grades


XACT Carbide Inserts - Style TPGB 
Click Here for more information or to order
• Positive rake insert for turning, facing and boring
• Use on small machines
• Precision ground
• 10º Relief angle
• Single-sided insert
• Feed range: .003" to .012" IPR

XACT Carbide Inserts - Style TPGC-LF 
Click Here for more information or to order
• Positive rake insert for turning, facing and boring
• Use on small machines
• Precision ground
• 10º Relief angle
• Single-sided insert with precision ground chip control
• Feed range .003" to .012" IPR

XACT Carbide Inserts - Style TPGH for Countersink and Chamfering Tools 
Click Here for more information or to order
• Use for boring
• Screw-on insert
• Available in three grades

XACT Carbide Inserts - Style TPGH for CRI-Bore Boring System 
Click Here for more information or to order
• Positive rake insert for turning, facing, boring and countersinking
• Use on small machines
• 11º Relief angle
• Single-sided insert with molded chip control
• Feed range .005" to .015" IPR

XACT Carbide Inserts - Style TPGH for Micro-Range Adjustable Boring Bar 
Click Here for more information or to order
• Use for boring
• Screw-on insert
• Available in three grades

XACT Carbide Inserts - Style TPGH 
Click Here for more information or to order
• Positive rake insert for turning, facing, boring and countersinking
• Use on small machines
• 11º Relief angle
• Single-sided insert with molded chip control
• Feed range .005" to .015" IPR

XACT Carbide Inserts - Style TPMR 
Click Here for more information or to order
• Use for semi-finish cuts where chip control is required
• Single-sided with molded chip control
• 11º Relief angle
• Feed range .003" to .018" IPR

XACT Carbide Inserts - Style TPMT 
Click Here for more information or to order
• Use for boring and facing - works great on all machine types
• Single-sided insert with chip control
• 11º Relief angle
• Feed range .003" to .015" IPR

XACT Carbide Inserts - Style TPU 
Click Here for more information or to order
• Use in difficult-to- machine materials, long or thin walled parts
• Utility ground for general purpose machining
• 11º Relief angle
• Feed range .003" to .025" IPR

XACT Carbide Inserts - Style VBMT 
Click Here for more information or to order
• Use for profiling and finish cuts to improve chip control
• Single-sided with chip control
• 5º Relief angle
• Feed range .005" to .015" IPR

XACT Carbide Inserts - Style VNMG 
Click Here for more information or to order
• Use for turning, facing, boring and profiling - great for finish cuts
• Molded chip control on both sides
• 0º Relief angle
• Feed range .010" to .030" IPR

XACT Carbide Inserts - Style VNMG-B 
Click Here for more information or to order
• Use for turning, facing, boring and profiling - great for finish cuts
• Molded chip control on both sides
• 0º Relief angle, 10º positive cutting action
• Feed range .008" to .020" IPR

XACT Carbide Inserts - Style VNMP 
Click Here for more information or to order
• Use for turning, boring and profiling on difficult-to-machine materials
• Double-sided with molded chip control
• 0º Relief angle, 10º positive cutting action
• Feed range .003" to .012" IPR

XACT Carbide Inserts - Style WCMT 
Click Here for more information or to order
• Use for turning and facing - works great for small machines
• Single-sided insert with chip control
• 7º Relief angle
• Feed range .005" to .015" IPR

XACT Carbide Inserts - Style WNMG 
Click Here for more information or to order
• Use this six-edged insert for turning, facing and boring
• Molded chip control on both sides
• 0º Relief angle
• Feed range .008" to .028" IPR

XACT Carbide Inserts - Style WNMG-P 
Click Here for more information or to order
• Use this six-edged insert for turning, facing and boring
• Molded chip control on both sides
• 0º Relief angle
• 10º Positive cutting action
• Feed range .008" to .028" IPR

XACT Carbide Inserts - Style WPMT 
Click Here for more information or to order
• Use for boring and facing - works great for all machine types
• Single-sided insert with chip control
• 11º Relief angle
• Feed range .005" to .015" IPR

XACT Carbide Inserts - Style XACT Carbide Inserts 
Click Here for more information or to order
• Use for turning and facing on the outside of the part
• Great for rigid set ups
• 0º Relief angle
• Feed range: .003" to .030" IPR

XACT Carbide Inserts - TCMT - Triangle 7░ Positive With Molded Chipbreaker - C-2
Click Here for more information or to order
  • Single-sided for semi-finishing and finishing.
  • Chip breaking in moderate range of feeds.
  • Positive cut, low cutting forces.
  • For a wide range of materials, soft materials and exotic alloys.
  • C-2 is a general purpose grade for all cast irons and nonferrous metals. It is superior on titanium, "K" Monel and bronze alloy i.e., aluminum bronze, manganese bronze, etc. It is an excellent general purpose grade.





XACT Carbide Inserts - TCMT - Triangle 7░ Positive With Molded Chipbreaker - C-5
Click Here for more information or to order
  • Single-sided for semi-finishing and finishing.
  • Chip breaking in moderate range of feeds.
  • Positive cut, low cutting forces.
  • For a wide range of materials, soft materials and exotic alloys.
  • C-5 is a steel cutting grade with an outstanding balance of hardness and toughness. It excels in rough cutting of steels at high speeds. Highly resistant to thermal shock, it cuts the entire range of steels. It is superior in climb or facing milling and turning out of round or heavily scaled materials.





XACT Carbide Inserts - TCMT - Triangle 7░ Positive With Molded Chipbreaker - TiN Coated
Click Here for more information or to order
  • Single-sided for semi-finishing and finishing.
  • Chip breaking in moderate range of feeds.
  • Positive cut, low cutting forces.
  • For a wide range of materials, soft materials and exotic alloys.
  • Tin coated grade on a tough, thermal resistant substrate. It is designed for milling steel at higher speeds with increased tool life.





XACT Carbide Inserts - TNG - Triangle Negative Ground All Over - C-2
Click Here for more information or to order
  • Double-sided, without chipformer.
  • Suited to short chipping materials i.e.cast iron.
  • C-2 is a general purpose grade for all cast irons and nonferrous metals. It is superior on titanium, "K" Monel and bronze alloy i.e., aluminum bronze, manganese bronze, etc. It is an excellent general purpose grade.





XACT Carbide Inserts - TNG - Triangle Negative Ground All Over - C-5
Click Here for more information or to order
  • Double-sided, without chipformer.
  • Suited to short chipping materials i.e.cast iron.
  • C-5 is a steel cutting grade with an outstanding balance of hardness and toughness. It excels in rough cutting of steels at high speeds. Highly resistant to thermal shock, it cuts the entire range of steels. It is superior in climb or facing milling and turning out of round or heavily scaled materials.





XACT Carbide Inserts - TNG - Triangle Negative Ground All Over - TiN Coated
Click Here for more information or to order
  • Double-sided, without chipformer.
  • Suited to short chipping materials i.e.cast iron.
  • Tin coated grade on a tough, thermal resistant substrate. It is designed for milling steel at higher speeds with increased tool life.





XACT Carbide Inserts - TNMA - Triangle Negative Ground Top & Bottom - C-2
Click Here for more information or to order
  • Double-sided without chipformer.
  • Suited to roughing and semi-roughing, short chipping materials.
  • C-2 is a general purpose grade for all cast irons and nonferrous metals. It is superior on titanium, "K" Monel and bronze alloy i.e., aluminum bronze, manganese bronze, etc. It is an excellent general purpose grade.





XACT Carbide Inserts - TNMA - Triangle Negative Ground Top & Bottom - C-5
Click Here for more information or to order
  • Double-sided without chipformer.
  • Suited to roughing and semi-roughing, short chipping materials.
  • C-5 is a steel cutting grade with an outstanding balance of hardness and toughness. It excels in rough cutting of steels at high speeds. Highly resistant to thermal shock, it cuts the entire range of steels. It is superior in climb or facing milling and turning out of round or heavily scaled materials.





XACT Carbide Inserts - TNMA - Triangle Negative Ground Top & Bottom - TiN Coated
Click Here for more information or to order
  • Double-sided without chipformer.
  • Suited to roughing and semi-roughing, short chipping materials.
  • Tin coated grade on a tough, thermal resistant substrate. It is designed for milling steel at higher speeds with increased tool life.





XACT Carbide Inserts - TNMG - Triangle Negative Molded Chipbreaker - C-2
Click Here for more information or to order
  • Double-sided for semi-roughing and roughing.
  • Chip breaking in feed range from .007 to .024 ipr.
  • For a wide range of materials and machining conditions.
  • Insert with 3/32" corner radius have special chipformer for heavy machining.
  • C-2 is a general purpose grade for all cast irons and nonferrous metals. It is superior on titanium, "K" Monel and bronze alloy i.e., aluminum bronze, manganese bronze, etc. It is an excellent general purpose grade.





XACT Carbide Inserts - TNMG - Triangle Negative Molded Chipbreaker - C-5
Click Here for more information or to order
  • Double-sided for semi-roughing and roughing.
  • Chip breaking in feed range from .007 to .024 ipr.
  • For a wide range of materials and machining conditions.
  • Insert with 3/32" corner radius have special chipformer for heavy machining.
  • C-5 is a steel cutting grade with an outstanding balance of hardness and toughness. It excels in rough cutting of steels at high speeds. Highly resistant to thermal shock, it cuts the entire range of steels. It is superior in climb or facing milling and turning out of round or heavily scaled materials.





XACT Carbide Inserts - TNMG - Triangle Negative Molded Chipbreaker - TiN Coated
Click Here for more information or to order
  • Double-sided for semi-roughing and roughing.
  • Chip breaking in feed range from .007 to .024 ipr.
  • For a wide range of materials and machining conditions.
  • Insert with 3/32" corner radius have special chipformer for heavy machining.
  • Tin coated grade on a tough, thermal resistant substrate. It is designed for milling steel at higher speeds with increased tool life.





XACT Carbide Inserts - TNMP - Triangle Negative With 5% Positive Cut - C-2
Click Here for more information or to order
  • Double-sided for semi-finishing and finishing.
  • Chip breaking in feed range from .004 to .016 ipr and depths of cut from .04 to .16 in.
  • Positive cut (+5░).
  • Low cutting forces for machining soft materials and exotic alloys.
  • C-2 is a general purpose grade for all cast irons and nonferrous metals. It is superior on titanium, "K" Monel and bronze alloy i.e., aluminum bronze, manganese bronze, etc. It is an excellent general purpose grade.





XACT Carbide Inserts - TNMP - Triangle Negative With 5% Positive Cut - C-5
Click Here for more information or to order
  • Double-sided for semi-finishing and finishing.
  • Chip breaking in feed range from .004 to .016 ipr and depths of cut from .04 to .16 in.
  • Positive cut (+5░).
  • Low cutting forces for machining soft materials and exotic alloys.
  • C-5 is a steel cutting grade with an outstanding balance of hardness and toughness. It excels in rough cutting of steels at high speeds. Highly resistant to thermal shock, it cuts the entire range of steels. It is superior in climb or facing milling and turning out of round or heavily scaled materials.





XACT Carbide Inserts - TNMP - Triangle Negative With 5% Positive Cut - TiN Coated
Click Here for more information or to order
  • Double-sided for semi-finishing and finishing.
  • Chip breaking in feed range from .004 to .016 ipr and depths of cut from .04 to .16 in.
  • Positive cut (+5░).
  • Low cutting forces for machining soft materials and exotic alloys.
  • Tin coated grade on a tough, thermal resistant substrate. It is designed for milling steel at higher speeds with increased tool life.





XACT Carbide Inserts - TPG - Triangle Positive Ground All Over - C-2
Click Here for more information or to order
  • Single-sided, without chipformer.
  • Positive cut, low cutting forces.
  • Suited to short chipping materials.
  • C-2 is a general purpose grade for all cast irons and nonferrous metals. It is superior on titanium, "K" Monel and bronze alloy i.e., aluminum bronze, manganese bronze, etc. It is an excellent general purpose grade.





XACT Carbide Inserts - TPG - Triangle Positive Ground All Over - C-5
Click Here for more information or to order
  • Single-sided, without chipformer.
  • Positive cut, low cutting forces.
  • Suited to short chipping materials.
  • C-5 is a steel cutting grade with an outstanding balance of hardness and toughness. It excels in rough cutting of steels at high speeds. Highly resistant to thermal shock, it cuts the entire range of steels. It is superior in climb or facing milling and turning out of round or heavily scaled materials.





XACT Carbide Inserts - TPG - Triangle Positive Ground All Over - TiN Coated
Click Here for more information or to order
  • Single-sided, without chipformer.
  • Positive cut, low cutting forces.
  • Suited to short chipping materials.
  • Tin coated grade on a tough, thermal resistant substrate. It is designed for milling steel at higher speeds with increased tool life.





XACT Carbide Inserts - TPMR - Triangle Positive Molded Chipbreaker - C-2
Click Here for more information or to order
  • Single-sided, for semi-finishing and finishing.
  • Positive chipformer, low cutting forces.
  • Especially suited to internal turning.
  • C-2 is a general purpose grade for all cast irons and nonferrous metals. It is superior on titanium, "K" Monel and bronze alloy i.e., aluminum bronze, manganese bronze, etc. It is an excellent general purpose grade.





XACT Carbide Inserts - TPMR - Triangle Positive Molded Chipbreaker - C-5
Click Here for more information or to order
  • Single-sided, for semi-finishing and finishing.
  • Positive chipformer, low cutting forces.
  • Especially suited to internal turning.
  • C-5 is a steel cutting grade with an outstanding balance of hardness and toughness. It excels in rough cutting of steels at high speeds. Highly resistant to thermal shock, it cuts the entire range of steels. It is superior in climb or facing milling and turning out of round or heavily scaled materials.





XACT Carbide Inserts - TPMR - Triangle Positive Molded Chipbreaker - TiN Coated
Click Here for more information or to order
  • Single-sided, for semi-finishing and finishing.
  • Positive chipformer, low cutting forces.
  • Especially suited to internal turning.
  • Tin coated grade on a tough, thermal resistant substrate. It is designed for milling steel at higher speeds with increased tool life.





XACT Carbide Inserts - TPU - Triangle Positive Ground Top & Bottom - C-2
Click Here for more information or to order
  • Single-sided, molded, without chipformer.
  • Positive cut, low cutting forces.
  • Suited to short chipping materials.
  • C-2 is a general purpose grade for all cast irons and nonferrous metals. It is superior on titanium, "K" Monel and bronze alloy i.e., aluminum bronze, manganese bronze, etc. It is an excellent general purpose grade.





XACT Carbide Inserts - TPU - Triangle Positive Ground Top & Bottom - C-5
Click Here for more information or to order
  • Single-sided, molded, without chipformer.
  • Positive cut, low cutting forces.
  • Suited to short chipping materials.
  • C-5 is a steel cutting grade with an outstanding balance of hardness and toughness. It excels in rough cutting of steels at high speeds. Highly resistant to thermal shock, it cuts the entire range of steels. It is superior in climb or facing milling and turning out of round or heavily scaled materials.





XACT Carbide Inserts - TPU - Triangle Positive Ground Top & Bottom - TiN Coated
Click Here for more information or to order
  • Single-sided, molded, without chipformer.
  • Positive cut, low cutting forces.
  • Suited to short chipping materials.
  • Tin coated grade on a tough, thermal resistant substrate. It is designed for milling steel at higher speeds with increased tool life.





XACT Carbide Inserts - VNMG - 35░ Diamond Negative With Molded Chipbreaker - C-2
Click Here for more information or to order
  • Double-sided for semi-roughing and roughing.
  • Chip breaking in feed range from .007 to .024 ipr.
  • For a wide range of materials and machining conditions.
  • C-2 is a general purpose grade for all cast irons and nonferrous metals. It is superior on titanium, "K" Monel and bronze alloy i.e., aluminum bronze, manganese bronze, etc. It is an excellent general purpose grade.





XACT Carbide Inserts - VNMG - 35░ Diamond Negative With Molded Chipbreaker - C-5
Click Here for more information or to order
  • Double-sided for semi-roughing and roughing.
  • Chip breaking in feed range from .007 to .024 ipr.
  • For a wide range of materials and machining conditions.
  • C-5 is a steel cutting grade with an outstanding balance of hardness and toughness. It excels in rough cutting of steels at high speeds. Highly resistant to thermal shock, it cuts the entire range of steels. It is superior in climb or facing milling and turning out of round or heavily scaled materials.





XACT Carbide Inserts - VNMG - 35░ Diamond Negative With Molded Chipbreaker - TiN Coated
Click Here for more information or to order
  • Double-sided for semi-roughing and roughing.
  • Chip breaking in feed range from .007 to .024 ipr.
  • For a wide range of materials and machining conditions.
  • Tin coated grade on a tough, thermal resistant substrate. It is designed for milling steel at higher speeds with increased tool life.





XACT Carbide Inserts - WNMG - Trigon With Hole & Chipbreaker - C-2
Click Here for more information or to order
  • Double-sided for semi-finishing and finishing.
  • Low cutting forces due to sharp positive rake.
  • C-2 is a general purpose grade for all cast irons and nonferrous metals. It is superior on titanium, "K" Monel and bronze alloy i.e., aluminum bronze, manganese bronze, etc. It is an excellent general purpose grade.





XACT Carbide Inserts - WNMG - Trigon With Hole & Chipbreaker - C-5
Click Here for more information or to order
  • Double-sided for semi-finishing and finishing.
  • Low cutting forces due to sharp positive rake.
  • C-5 is a steel cutting grade with an outstanding balance of hardness and toughness. It excels in rough cutting of steels at high speeds. Highly resistant to thermal shock, it cuts the entire range of steels. It is superior in climb or facing milling and turning out of round or heavily scaled materials.





XACT Carbide Inserts - WNMG - Trigon With Hole & Chipbreaker - TiN Coated
Click Here for more information or to order
  • Double-sided for semi-finishing and finishing.
  • Low cutting forces due to sharp positive rake.
  • Tin coated grade on a tough, thermal resistant substrate. It is designed for milling steel at higher speeds with increased tool life.





XACT Carbide Inserts for 2" Indexable End Mills R8 Shank 
Click Here for more information or to order
• Use in difficult-to- machine materials, long or thin walled parts
• Utility ground for general purpose machining
• 11º Relief angle
• Feed range .003" to .025" IPR

XACT Carbide Inserts for Countersink and Chamfering Tools 
Click Here for more information or to order
• Use for contour and end milling
• Positive rake 15º and 45º lead
• Available in 1" to 3"

XACT Carbide Inserts for Indexable Cut-Off Tool System - Style GTL 
Click Here for more information or to order
With replacement carbide inserts, the cutting force itself locks the insert firmly in place.
This tool solves cut-off problems without any loose parts. All cutting forces (even the resulting axial forces) are utilized to retain the insert in its seat. The cutting force increases the grip during the cut-off operation
so that removal is only possible by applying force at the back of the insert. (We give you a special extractor.)

XACT Carbide Inserts for Indexable Cut-Off Tool System - Style GTN 
Click Here for more information or to order
With replacement carbide inserts, the cutting force itself locks the insert firmly in place.
This tool solves cut-off problems without any loose parts. All cutting forces (even the resulting axial forces) are utilized to retain the insert in its seat. The cutting force increases the grip during the cut-off operation
so that removal is only possible by applying force at the back of the insert. (We give you a special extractor.)


XACT Carbide Inserts for Indexable Cut-Off Tool System - Style GTR 
Click Here for more information or to order
With replacement carbide inserts, the cutting force itself locks the insert firmly in place.
This tool solves cut-off problems without any loose parts. All cutting forces (even the resulting axial forces) are utilized to retain the insert in its seat. The cutting force increases the grip during the cut-off operation
so that removal is only possible by applying force at the back of the insert. (We give you a special extractor.)

XACT Carbide Inserts for Indexable End Mills - Style ABL Parallel Inserts 
Click Here for more information or to order
• Use for end milling
• Clamp-on insert
• Available in three grades

XACT Carbide Inserts for Indexable End Mills - Style RNMA 
Click Here for more information or to order
• Use for milling
• 0º Relief angle
• Available in three grades

XACT Carbide Inserts for Indexable End Mills - Style SD and SPMW 90º Square 
Click Here for more information or to order
• Use for contour, slotting and end milling
• Screw-on style insert
• Available in three grades

XACT Carbide Inserts for Indexable End Mills - Style SPG 
Click Here for more information or to order
• Use for contour and end milling
• Positive rake 15º and 45º lead
• Available in 1" to 3"

XACT Carbide Inserts for Indexable End Mills - Style SPU 
Click Here for more information or to order
• Use for contour and end milling
• Positive rake 15º and 45º lead
• Available in 1" to 3"

XACT Carbide Inserts for Indexable Turning Tools - Style ITT 60º Triangle 
Click Here for more information or to order
An Economical Alternative to Brazed Tip Tool Bits


XACT Carbide Inserts for Round Indexable End Mills 
Click Here for more information or to order
• 11º Relief angle
• Precision ground all over
• Feed range: .003" to .020" IPR

XACT Carbide Milling Inserts - Insert for Type 6-904 Milling Cutters 
Click Here for more information or to order

XACT Carbide Milling Inserts - Insert for Type 6-907 Milling Cutters 
Click Here for more information or to order
• Use for turning, facing and boring
• Eight cutting edges
• Use a mechanical chipbreaker CBS for chip control in turning applications
• 0º Relief angle precision ground
• Feed range: .003" to .030" IPR

XACT Carbide Milling Inserts - Style ABL 
Click Here for more information or to order
We offer a broad range of XACT insert styles and grades for all your milling applications. High grade tungsten, carbide and cobalt are mixed to create these tough long-lasting inserts. If you're looking for a great value, use our PerformancePLUS inserts. These inserts are offered with an aluminum oxide coating and a titanium nitride coating.

XACT Carbide Milling Inserts - Style AP/AD 
Click Here for more information or to order
We offer a broad range of XACT insert styles and grades for all your milling applications. High grade tungsten, carbide and cobalt are mixed to create these tough long-lasting inserts. If you're looking for a great value, use our PerformancePLUS inserts. These inserts are offered with an aluminum oxide coating and a titanium nitride coating.

XACT Carbide Milling Inserts - Style APFT 
Click Here for more information or to order

XACT Carbide Milling Inserts - Style APHW-100304-PDER 
Click Here for more information or to order
• 11º Relief angle

XACT Carbide Milling Inserts - Style APHW-160408-PDER 
Click Here for more information or to order
• 11º Relief angle

XACT Carbide Milling Inserts - Style APHW-160416-PDER 
Click Here for more information or to order
• 11º Relief angle

XACT Carbide Milling Inserts - Style APHW-160432-PDER 
Click Here for more information or to order
• 11º Relief angle

XACT Carbide Milling Inserts - Style APHW-160448-PDER 
Click Here for more information or to order
• 11º Relief angle

XACT Carbide Milling Inserts - Style APHX-1003-PDFR 
Click Here for more information or to order
• 11º Relief angle

XACT Carbide Milling Inserts - Style APKT 
Click Here for more information or to order
J&L offers a broad range of Interstate insert styles and grades for all your milling applications. High grade tungsten, carbide and cobalt are mixed to create these tough long-lasting inserts. If you're looking for a great value, use our PerformancePLUS inserts. These inserts are offered with an aluminum oxide coating and a titanium nitride coating.

XACT Carbide Milling Inserts - Style APKT-1003-PDER 
Click Here for more information or to order
We offer a broad range of XACT insert styles and grades for all your milling applications. High grade tungsten, carbide and cobalt are mixed to create these tough long-lasting inserts. If you're looking for a great value, use our PerformancePLUS inserts. These inserts are offered with an aluminum oxide coating and a titanium nitride coating.

XACT Carbide Milling Inserts - Style APKT-1604-PDER 
Click Here for more information or to order
• 11º Relief angle

XACT Carbide Milling Inserts - Style BCBP 
Click Here for more information or to order

XACT Carbide Milling Inserts - Style CEHW-0602-AEEL 
Click Here for more information or to order

XACT Carbide Milling Inserts - Style CEHW-0602-AEER 
Click Here for more information or to order

XACT Carbide Milling Inserts - Style CEHW-1204-AEEL 
Click Here for more information or to order

XACT Carbide Milling Inserts - Style CEHW-1204-AEER 
Click Here for more information or to order

XACT Carbide Milling Inserts - Style GD 
Click Here for more information or to order

XACT Carbide Milling Inserts - Style HPE 
Click Here for more information or to order

XACT Carbide Milling Inserts - Style LCB 
Click Here for more information or to order

XACT Carbide Milling Inserts - Style LNCX 
Click Here for more information or to order

XACT Carbide Milling Inserts - Style OFHN 
Click Here for more information or to order

XACT Carbide Milling Inserts - Style RDHW 10T3 
Click Here for more information or to order

XACT Carbide Milling Inserts - Style RDHW1204EN 
Click Here for more information or to order

XACT Carbide Milling Inserts - Style RFHN 
Click Here for more information or to order

XACT Carbide Milling Inserts - Style SD 
Click Here for more information or to order
• 11º Positive relief angle
Note: SD322D is 15º positive relief angle

XACT Carbide Milling Inserts - Style SDEB 
Click Here for more information or to order

XACT Carbide Milling Inserts - Style SDHW-12T308-EN 
Click Here for more information or to order

XACT Carbide Milling Inserts - Style SDKT 
Click Here for more information or to order
• 15º Positive relief angle
• 45º x 3/64" Corner flat

XACT Carbide Milling Inserts - Style SDLX-090308-EN 
Click Here for more information or to order

XACT Carbide Milling Inserts - Style SDMT-1205-ER 
Click Here for more information or to order

XACT Carbide Milling Inserts - Style SEAN 
Click Here for more information or to order
• Use SEAN style inserts for a finer finish
• For the highest quality finish, the IPR should be less than 2/3 of the length of the insert facet length
• For accelerated feed rates while still maintaining fine finishes, use the LECN wiper style inserts

XACT Carbide Milling Inserts - Style SEC 
Click Here for more information or to order
• Use for milling in a variety of materials
• 20º Relief angle
• Precision ground insert

XACT Carbide Milling Inserts - Style SEC-8 
Click Here for more information or to order
• 20º Relief angle
• Precision ground insert
• Available in two uncoated grades
• 1/8" x 15º Corner flats

XACT Carbide Milling Inserts - Style SEKN 
Click Here for more information or to order
• 45º Lead angle
• 20º Positive relief angle

XACT Carbide Milling Inserts - Style SEKN-AFTN 
Click Here for more information or to order
• 45º Lead angle
• 20º Positive relief angle

XACT Carbide Milling Inserts - Style SEPR 
Click Here for more information or to order
• 45º Lead angle
• 20º Positive relief angle

XACT Carbide Milling Inserts - Style SFA 
Click Here for more information or to order
• 25º Relief angle
• Precision ground insert

XACT Carbide Milling Inserts - Style SHC 
Click Here for more information or to order
• Negative-positive
• 30º Lead angle
• 15º Chamfer clearance

XACT Carbide Milling Inserts - Style SHX 
Click Here for more information or to order
• Negative-positive
• 30º Lead angle
• 15º Chamfer clearance

XACT Carbide Milling Inserts - Style SJC 
Click Here for more information or to order
• Negative-positive
• 45º Lead angle
• 15º Chamfer clearance

XACT Carbide Milling Inserts - Style SNC 
Click Here for more information or to order
• 45º Lead angle
• 0º Negative relief angle

XACT Carbide Milling Inserts - Style SPC / SRC 
Click Here for more information or to order
• 11º Relief angle
• Precision ground insert
• Available in two coated grades

XACT Carbide Milling Inserts - Style SPC 
Click Here for more information or to order
• Use for milling in a variety of materials
• 11º Relief angle
• Precision ground insert
• 45º Lead angle

XACT Carbide Milling Inserts - Style TEHW-0602-AEEN 
Click Here for more information or to order

XACT Carbide Milling Inserts - Style TPC 
Click Here for more information or to order
• 11º Relief angle
• Available in two coated and two uncoated grades

XACT Carbide Milling Inserts - Style VCGT-FALP 
Click Here for more information or to order
• 7º or 11º Relief Angle

XACT Carbide Milling Inserts - Style VPGT-FALP 
Click Here for more information or to order
• 7º or 11º Relief Angle

XACT Carbide Milling Inserts - Style XDCW 
Click Here for more information or to order
• 15º Relief Angle

XACT Carbide Milling Inserts - Style XDMT-R 
Click Here for more information or to order
• 15º Relief Angle

XACT Copy Mill Inserts - Style KWC-CH 
Click Here for more information or to order

XACT Copy Mill Inserts - Style KWC-RE 
Click Here for more information or to order

XACT Copy Mill Inserts - Style KWC-RI 
Click Here for more information or to order

XACT Copy Mill Inserts - Style KWF 
Click Here for more information or to order

XACT Copy Mill Inserts - Style KWF-F 
Click Here for more information or to order

XACT Copy Mill Inserts - Style KWR 
Click Here for more information or to order

XACT Copy Mill Inserts - Style KWR-F 
Click Here for more information or to order

XACT Flat Bottom Deep Grooving Dogbone Inserts - Full Radius Deep Grooving Dogbone Insert 
Click Here for more information or to order
These inserts are available in groove widths of .125", .156", .188", .218", .250", .281", .312" and .375" for square and round grooves. The inserts are 1-1/8" long and are precision ground. These inserts fit competitive style holders that hold the 1-1/8" long insert.

XACT Flat Bottom Deep Grooving Dogbone Inserts - Square Groove Dogbone Insert 
Click Here for more information or to order
These inserts are available in groove widths of .125", .156", .188", .218", .250", .281", .312" and .375" for square and round grooves. The inserts are 1-1/8" long and are precision ground. These inserts fit competitive style holders that hold the 1-1/8" long insert.

XACT Indexable Inserts - Style CDCD 80º Diamond Screw-On 
Click Here for more information or to order
Have any small hole boring applications? The XACT small hole boring bars and inserts will provide you with excellent part finishes and great sizecontrol. Minimum bores as low as .190" are no problem for these bars. The new bars have a superior finish over conventional black oxide bars. They are available to purchase individually or in sets. If you're a machinist, you need these tools!

XACT Indexable Inserts - Style CDCG 80º Diamond Screw-On 
Click Here for more information or to order
Have any small hole boring applications? The XACT small hole boring bars and inserts will provide you with excellent part finishes and great sizecontrol. Minimum bores as low as .190" are no problem for these bars. The new bars have a superior finish over conventional black oxide bars. They are available to purchase individually or in sets. If you're a machinist, you need these tools!

XACT Inserts for Style SDCW Convex Turning and Milling Cutters 
Click Here for more information or to order
*2 Cutting edges; all others 4 cutting edges

XACT Laydown Threading System - Style External 60º Right Hand Full Profile Inserts 
Click Here for more information or to order
• Produces the complete thread including the major outside diameter
• A separate insert is required for every thread-per-inch
• Available in threads-per-inch from 72 to 3

XACT Laydown Threading System - Style External Acme Right Hand Full Profile Inserts 
Click Here for more information or to order
• Full profile inserts finish the thread diameter
• Each insert produces a specific thread-per-inch
• The Acme thread is used in mechanical industries for motion transfer screws

XACT Laydown Threading System - Style External National Pipe Right Hand Full Profile Inserts 
Click Here for more information or to order
• Full profile inserts finish the thread diameter
• Each insert produces a specific thread- per-inch
• The NPT thread is used in fittings and pipe couplings

XACT Laydown Threading System - Style Internal 60º Right Hand Full Profile Inserts 
Click Here for more information or to order
• Produces the complete thread including the major outside diameter
• A separate insert is required for every thread-per-inch
• Available in threads-per-inch from 72 to 3

XACT Laydown Threading System - Style Internal Acme Right Hand Full Profile Inserts 
Click Here for more information or to order
• Full profile inserts finish the minor inside thread diameter
• Each insert produces a specific thread-per-inch
• The Acme thread is used in mechanical industries for motion transfer screws

XACT Laydown Threading System - Style Internal National Pipe Right Hand Full Profile Inserts 
Click Here for more information or to order
• The full profile insert finishes the minor inside diameter
• Each insert produces a specific thread-per-inch
• The NPT thread is used in fittings and pipe couplings

XACT Miniature and Ultra Miniature Threading System - Style 06 IR A60 Miniature Inserts - 
Click Here for more information or to order
Miniature Threading inserts and low speed coated grades combine to give you these amazing new product lines: the Mini and Ultra Mini are now successfully replacing taps while offering many advantages. If you're looking for better surface quality, better thread geometry and a tighter tolerance . . . use the Mini and Ultra Mini Tools, to thread to the bottom of blind holes.


XACT Miniature and Ultra Miniature Threading System - Style 08 IR A-60 Miniature Inserts - 
Click Here for more information or to order
Miniature Threading inserts and low speed coated grades combine to give you these amazing new product lines: the Mini and Ultra Mini are now successfully replacing taps while offering many advantages. If you're looking for better surface quality, better thread geometry and a tighter tolerance . . . use the Mini and Ultra Mini Tools, to thread to the bottom of blind holes.


XACT Mini-InterGroove Internal Grooving System - Copying Inserts 
Click Here for more information or to order

XACT Mini-InterGroove Internal Grooving System - Full Radius Grooving Inserts 
Click Here for more information or to order

XACT Mini-InterGroove Internal Grooving System - Turning Inserts 
Click Here for more information or to order

XACT Mini-Systems - Mini-System Grooving and Cut-Off System 
Click Here for more information or to order
• Toolholders require minimum hardware
• Features one positive locking insert screw
• Insert pocket design assures a repeatable cutting edge location
• Standard inserts are available in widths from 0.5-2.0 mm, in uncoated and coated carbide grades
• When cutting off solid bars to center, the cutting edge should be .003-.005 (.010-.012 mm) above center of height


XACT Mini-Thin - Mini-System Grooving and Cut-Off System 
Click Here for more information or to order
• Insert pocket locking design assures a repeatable cutting edge location
• Right hand toolholders use right hand inserts, left hand toolholders use left hand inserts
• Standard inserts are available in widths from .019" to .078"
• When cutting off solid bars to center, the cutting edge should be .003" to .005" (.010 to .012 mm) above center of height


XACT On-Edge Grooving - Style TNMA-NG - Carbide Grooving Inserts 
Click Here for more information or to order
• 0º Precision ground on all surfaces with a straight through hole
• Standard inserts are available with a straight through hole
• Two quality grades are available for use in a wide variety of materials
• Three cutting edges per insert

XACT On-Edge Grooving - Style TNMC-NG - Carbide Grooving Inserts 
Click Here for more information or to order
• 0º Precision ground on all surfaces with double countersinks
• Standard inserts are available with double countersinks
• Two quality grades are available for use in a wide variety of materials
• Three cutting edges per insert

XACT On-Edge System - Style TNMA / TPMA 
Click Here for more information or to order
• Straight thru hole
• 29-1/2º Acme thread form
• Three great general purpose grades: I-22, I-55 uncoated and TCN55 gold coated
• Acme thread forms are used in the mechanical industry for motion transmission screws
• TPMA Style 10º positive rake, ideal for internal threading

XACT On-Edge System - Style TNMC / TPMC 
Click Here for more information or to order
• 29-1/2º Acme thread form
• Three great general purpose grades: I-22, I-55 uncoated and TCN55 gold coated
• Countersinks on both sides
• Acme thread forms are used in the mechanical industry for motion transmission screws
• TPMC Style 10º positive rake, ideal for internal threading

XACT On-Edge Threading - Style TNMA and TPMA On-Edge 
Click Here for more information or to order
You'll find it with the XACT On-Edge Threading System.
The system features two insert styles - both of which offer three cutting edges. Use the screw-down style insert with double countersinks or the straight through hole style in either internal or external applications.
Versatile and smart - the Interstate On-Edge Threading System is for you.

XACT On-Edge Threading - Style TNMC and TPMC On-Edge 
Click Here for more information or to order
You'll find it with the XACT On-Edge Threading System.
The system features two insert styles - both of which offer three cutting edges. Use the screw-down style insert with double countersinks or the straight through hole style in either internal or external applications.
Versatile and smart - the Interstate On-Edge Threading System is for you.

XACT Shell Mills - Style TPG 60º Triangle Clamp-On Insert 
Click Here for more information or to order
We offer a broad range of XACT insert styles and grades for all your turning, facing, chamfering and boring applications. High grade tungsten, carbide and cobalt are mixed to create these tough, long-lasting inserts. Add a premium coating and you've got an insert that will last and last. If youĂre looking for a great value, use our Performance Plus inserts. These inserts are offered with an aluminum oxide coating and a titanium nitride coating.

Super popular screw-on style inserts cut even your toughest materials. Try these inserts and youĂll soon see why itĂs the fastest growing style in the U.S.


XACT Shell Mills - Style TPG 
Click Here for more information or to order
• Use for face milling in a variety of materials
• Positive cutting action reduces cutting forces and improves tool life
• Available in three grades


XACT Threading System - Style External 60º V Partial Profile with Chip Control 
Click Here for more information or to order
The Laydown Threading System is one of four threading systems available. It's called “Laydown” because the insert actually lays down on the toolholder. You get three cutting edges per insert.
The Laydown system not only allows you to thread a large range of sizes, it gives you the ability to thread small diameter holes as well.
In this catalog, the Laydown System is featured with three insert grades: I-55, TCN55 and T20.

XACT Threading System - Style External 60º V Partial Profile 
Click Here for more information or to order
The Laydown Threading System is one of four threading systems available. It's called “Laydown” because the insert actually lays down on the toolholder. You get three cutting edges per insert.
The Laydown system not only allows you to thread a large range of sizes, it gives you the ability to thread small diameter holes as well.
In this catalog, the Laydown System is featured with three insert grades: I-55, TCN55 and T20.

XACT Threading System - Style Internal 60º Partial Profile with Chip Control 
Click Here for more information or to order
The Laydown Threading System is one of four threading systems available. It's called “Laydown” because the insert actually lays down on the toolholder. You get three cutting edges per insert.
The Laydown system not only allows you to thread a large range of sizes, it gives you the ability to thread small diameter holes as well.
In this catalog, the Laydown System is featured with three insert grades: I-55, TCN55 and T20.

XACT Threading System - Style Internal 60º Partial Profile 
Click Here for more information or to order
The Laydown Threading System is one of four threading systems available. It's called “Laydown” because the insert actually lays down on the toolholder. You get three cutting edges per insert.
The Laydown system not only allows you to thread a large range of sizes, it gives you the ability to thread small diameter holes as well.
In this catalog, the Laydown System is featured with three insert grades: I-55, TCN55 and T20.

XACT Top Groove System - Style IB Top Groove Blanks - It's All About Clamping 
Click Here for more information or to order
If you're looking for superb clamping, look no further. The XACT Top Groove System is for you. The clamping system works in conjunction with the locking notch of the insert, pulling the insert down, back and to the side. This system surpasses conventional threading and grooving systems and leaves them in the dust when it comes to holding the insert in place. The unique 3º insert side relief angle provides side clearance, permitting the user to groove close to the machined shoulder.

XACT Top Groove System - Style IG Top Groove Insert - It's All About Clamping 
Click Here for more information or to order
If you're looking for superb clamping, look no further. The XACT Top Groove System is for you. The clamping system works in conjunction with the locking notch of the insert, pulling the insert down, back and to the side. This system surpasses conventional threading and grooving systems and leaves them in the dust when it comes to holding the insert in place. The unique 3º insert side relief angle provides side clearance, permitting the user to groove close to the machined shoulder.


XACT Top Groove Threading Inserts - Style IT - Proven Performers 
Click Here for more information or to order
Your insert isn't going anywhere! The XACT clamping system and the insert locking groove work together to provide rigid locking by pulling the insert down, back and to the side. The rugged bridge clamp provides superior clamping over conventional threading and grooving systems. The unique 3º insert side relief angle provides side clearance and permits threading up to the shoulder of the workpiece.

XACT Top Groove Threading Inserts - Style ITF - Proven Performers 
Click Here for more information or to order
Your insert isn't going anywhere! The XACT clamping system and the insert locking groove work together to provide rigid locking by pulling the insert down, back and to the side. The rugged bridge clamp provides superior clamping over conventional threading and grooving systems. The unique 3º insert side relief angle provides side clearance and permits threading up to the shoulder of the workpiece.

XACT Top Groove Threading Inserts - Style ITP - Proven Performers 
Click Here for more information or to order
Your insert isn't going anywhere! The XACT clamping system and the insert locking groove work together to provide rigid locking by pulling the insert down, back and to the side. The rugged bridge clamp provides superior clamping over conventional threading and grooving systems. The unique 3º insert side relief angle provides side clearance and permits threading up to the shoulder of the workpiece.


Servicing Industry Since 1968

Have a Question or Need Technical Assistance? For Personal Service Click Here to contact a NSS dealer for your state.