Search:

View Janitorial Products Index

Click Here for Ordering Instructions and Shipping Information

MRO Pictorial Index

Abrasives



Cutting Tools



Indexable Cutting Tools




Fasteners, Metals & Plastics



Fluids & Lubricants



Hand Tools



Machinery & Accessories



Material Handling



Power Tools



Precision Tools



Safety



Shop Supplies



Toolholding & Workholding



Tooling Components




Fasteners, Metals and Plastics - Ground Flat Stock M-2 High Speed Steel


Ground Flat Stock - High Speed Steel (M-2) - 1/16" Thick - 18" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


M-2 HIGH SPEED STEEL
This molybdenum-type high speed steel is hardenable to Rc 65. It features excellent toughness and resistance to softening at elevated temperatures and provides excellent abrasion resistance at room temperature.


Ground Flat Stock - High Speed Steel (M-2) - 1/4" Thick - 18" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


M-2 HIGH SPEED STEEL
This molybdenum-type high speed steel is hardenable to Rc 65. It features excellent toughness and resistance to softening at elevated temperatures and provides excellent abrasion resistance at room temperature.


Ground Flat Stock - High Speed Steel (M-2) - 1/8" Thick - 18" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


M-2 HIGH SPEED STEEL
This molybdenum-type high speed steel is hardenable to Rc 65. It features excellent toughness and resistance to softening at elevated temperatures and provides excellent abrasion resistance at room temperature.


Ground Flat Stock - High Speed Steel (M-2) - 3/16" Thick - 18" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


M-2 HIGH SPEED STEEL
This molybdenum-type high speed steel is hardenable to Rc 65. It features excellent toughness and resistance to softening at elevated temperatures and provides excellent abrasion resistance at room temperature.


Ground Flat Stock - High Speed Steel (M-2) - 3/8" Thick - 18" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


M-2 HIGH SPEED STEEL
This molybdenum-type high speed steel is hardenable to Rc 65. It features excellent toughness and resistance to softening at elevated temperatures and provides excellent abrasion resistance at room temperature.



Servicing Industry Since 1968

Have a Question or Need Technical Assistance? For Personal Service Click Here to contact a NSS dealer for your state.