Search:

View Janitorial Products Index

Click Here for Ordering Instructions and Shipping Information

MRO Pictorial Index

Abrasives



Cutting Tools



Indexable Cutting Tools




Fasteners, Metals & Plastics



Fluids & Lubricants



Hand Tools



Machinery & Accessories



Material Handling



Power Tools



Precision Tools



Safety



Shop Supplies



Toolholding & Workholding



Tooling Components




Fasteners, Metals and Plastics - Ground Flat Stock D-2 Standard


Ground Flat Stock - Air Hardening (D-2) - 1" Thick - 18" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 1" Thick - 36" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 1/16" Thick - 18" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 1/16" Thick - 36" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 1/2" Thick - 18" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 1/2" Thick - 36" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 1/4" Thick - 18" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 1/4" Thick - 36" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 1/8" Thick - 18" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 1/8" Thick - 36" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 1-1/2" Thick - 18" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 1-1/2" Thick - 36" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 1-1/4" Thick - 18" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 1-1/4" Thick - 36" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 1-1/8" Thick - 18" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 1-1/8" Thick - 36" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 1-3/8" Thick - 18" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 1-3/8" Thick - 36" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 2" Thick - 18" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 2" Thick - 36" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 2-1/2" Thick - 18" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 2-1/2" Thick - 36" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 3" Thick - 18" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 3" Thick - 36" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 3/16" Thick - 18" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 3/16" Thick - 36" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 3/4" Thick - 18" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 3/4" Thick - 36" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 3/8" Thick - 18" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 3/8" Thick - 36" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 4" Thick - 18" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 4" Thick - 36" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 5/16" Thick - 18" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 5/16" Thick - 36" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 5/32" Thick - 18" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 5/32" Thick - 36" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 5/8" Thick - 18" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 5/8" Thick - 36" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 7/16" Thick - 18" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 7/16" Thick - 36" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 7/8" Thick - 18" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.


Ground Flat Stock - Air Hardening (D-2) - 7/8" Thick - 36" Lengths
Click Here for more information or to order
All Ground Flat Stock is 100% free of decarburization on all six sides and can be heat treated immediately without further metal removal. Thickness and width are horizontally ground to a maximum finish of 35 Ra.

All tool steel analysis (O-1, A-2, A-6, D-2, S-7, & M-2) are supplied in the annealed steel condition. Close control assures complete spheroidization throughout. The low-carbon analysis (Low Carbon) is supplied with pearlitic microstructure. Our new prehardened grade (4142) is made from alloy steel & prehardened to Rc 28-32.

All Ground Flat Stock is produced from cross-rolled sheet or plate, assuring a more homogeneous structure and finer grain size than other types. Furthermore, the cross-rolling process significantly enhances toughness of the product and increase tensile strength in the transverse direction.

All ends of Ground Flat Stock are precisely cut and deburred to insure excellent yields and handling safety. Thickness 3/16" and up are cold sawed, while lighter sections are sheared.


D-2 AIR HARDENING
This Ground Flat Stock is fine quality, air hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness found in D-2 results from its high carbon and high chromium analysis. D-2 is an extraordinary tool steel that can be specified for the most demanding application. It is, of course, supplied in the full spheroidized condition, 100% free of decarb and other surface imperfections. D-2's low sulphur content makes it NON-FREE MACHINING.



Servicing Industry Since 1968

Have a Question or Need Technical Assistance? For Personal Service Click Here to contact a NSS dealer for your state.