Search:

View Janitorial Products Index

Click Here for Ordering Instructions and Shipping Information

MRO Pictorial Index

Abrasives



Cutting Tools



Indexable Cutting Tools




Fasteners, Metals & Plastics



Fluids & Lubricants



Hand Tools



Machinery & Accessories



Material Handling



Power Tools



Precision Tools



Safety



Shop Supplies



Toolholding & Workholding



Tooling Components




Cutting Tools - End Mills - HSS Roughing


Cleveland Twist Drill 3 Flute PM Plus™ Roughing End Mills for Aluminum - Series 538 
Click Here for more information or to order
• The most efficient rougher in the industry for aggressive/heavy aluminum removal
• Doubles...triples feed rates of conventional high speed tools
• Special proprietary powder metal material, for added strength required to run high feed rates
• Special end geometry for improved performance in ramping and plunging
• High helix, high shear cutting for smoother chip flow and reduced cutting forces

Hanita Coarse Profile Roughing End Mills - Cobalt - Non-Center Cutting and Center Cutting 
Click Here for more information or to order
• For deep slotting, pocketing and heavy side cuts
• Fully eccentric relief for better edge strength and easier regrinding
• Excellent performance in steels and high temperature alloys
• TiALN coated available

Hanita End Mills for Stainless, Titanium and Nickel Base Alloys - 3 Flute Semi-Rougher 
Click Here for more information or to order
Sub-Micrograin Carbide - 3 Flute with Chip Breakers

Hanita Fine Profile Roughing End Mills - Center Cutting - Cobalt 
Click Here for more information or to order
• For profiling and shallow slotting (< 1xD) in harder materials
• Fully eccentric relief for better edge strength and easier regrinding
• Excellent performance in harder steels, stainless, high temperature alloys and titanium alloys
• TiALN coated also available

Hanita Fine Profile Roughing End Mills - Non-Center Cutting - Cobalt 
Click Here for more information or to order
• For profiling and shallow slotting (< 1xD) in harder materials
• Fully eccentric relief for better edge strength and easier regrinding
• Excellent performance in harder steels, stainless, high temperature alloys and titanium alloys
• TiALN coated also available

Hanita M42 Cobalt Roughing End Mills for Aluminum - 3 Flute - High Helix - Center Cutting 
Click Here for more information or to order
• (61x9 Made from M7, 62x9 made from M42 material) with extra-coarse profile, specifically designed with optimum chip evacuation for machining aluminum
• Especially effective for deep pocketing and peripheral operations especially in horizontal drilling machines, optimizing metal removal rates over conventional roughers

Hanita Powdered Metal Roughing End Mills - Coarse Profile - Center Cutting 
Click Here for more information or to order
• Powder metal extends tool life in comparison to conventional high speed steel or cobalt
• Uniquely designed for heavy stock removal up to the highest spindle speeds
• Special double radial relief avoids sticking and gluing of material on the back of the tooth and improves chip evacuation velocity

Hanita Powdered Metal Roughing End Mills - Extra Fine Profile - Center Cutting 
Click Here for more information or to order
• Powder metal extends tool life in comparison to conventional high speed steel or cobalt
• Uniquely designed for heavy stock removal up to the highest spindle speeds
• Special double radial relief avoids sticking and gluing of material on the back of the tooth and improves chip evacuation velocity

Hanita Powdered Metal Roughing End Mills - Fine Profile - Center Cutting 
Click Here for more information or to order
• Powder metal extends tool life in comparison to conventional high speed steel or cobalt
• Uniquely designed for heavy stock removal up to the highest spindle speeds
• Special double radial relief avoids sticking and gluing of material on the back of the tooth and improves chip evacuation velocity

Hanita Semi-Roughing End Mills - M42 - 8% Cobalt 
Click Here for more information or to order
• For achieving a 100-125 RMS finishing single pass

Hanita The Original “Stub Rougher” - Cobalt - Center Cutting 
Click Here for more information or to order
• TiALN coated available
• Fully eccentric relief for better edge strength and easier regrinding
• Excellent performance in steels, stainlesses, high temperature alloys and titanium

Niagara Cutter 3 Flute High Helix Coarse Pitch Roughing End Mills Center Cut Cobalt for Aluminum 
Click Here for more information or to order
• Use for roughing in materials that produce long chips, such as aluminum and aluminum alloys
• These tools also work well in copper and copper alloys, soft steels and thermoplastics
• Features large polished chip spaces and center cutting design

Niagara Cutter 3 Flute Roughing End Mills - Coarse Pitch - M-42 8% Cobalt - Center Cutting 
Click Here for more information or to order
• Use for plunge cutting to full depth, followed by horizontal feedings
• 3 Flute design allows for extra large chip spaces
• Ideal for milling in softer material where chip evacuation is a problem

Niagara Cutter 3 Flute Roughing End Mills - Fine Pitch - M-42 8% Cobalt - Center Cutting 
Click Here for more information or to order
• Ideal for slotting in materials 28 HRc and harder

Niagara Cutter Coarse Pitch Roughing End Mills - Non-Center Cutting - M-42 8% Cobalt 
Click Here for more information or to order
• Use for general purpose milling of soft to medium-hard materials
• Suitable for heavier feed rates

• TiN coating improves tool life and allows elevated speeds and feeds
• TiCN coating is the ideal choice for cutting extremely abrasive or difficult-to-cut materials

Niagara Cutter Coarse Pitch Roughing End Mills - Non-Centering Cutting - M-42 8% Cobalt 
Click Here for more information or to order
• Use for general purpose milling of soft to medium-hard materials
• Suitable for heavier feed rates

• TiN coating improves tool life and allows elevated speeds and feeds
• TiCN coating is the ideal choice for cutting extremely abrasive or difficult-to-cut materials

Niagara Cutter Coarse Pitch Roughing End Mills - TiN Coated - M-42 8% Cobalt - Center Cutting 
Click Here for more information or to order
• Use for plunge cutting to full depth, followed by horizontal feedings

Niagara Cutter Coarse Pitch Roughing End Mills - Uncoated - Cobalt - Center Cutting 
Click Here for more information or to order
• For use where heavy roughing cuts will be followed by a finishing application

Niagara Cutter Coarse Pitch Roughing End Mills - Uncoated - Non-Center Cutting - M-42 8% Cobalt 
Click Here for more information or to order
• For use where heavy roughing cuts are to be followed with a finishing operation
• Suitable for heavy-duty milling of mild steels, soft to medium hard steels, stainless steels and non-ferrous metals
• Can be run at heavier feed rates with less chatter and vibration
• Requires less horsepower than conventional end mills

Niagara Cutter Fine Pitch Roughing End Mills - M-42 8% Cobalt - Non-Center Cutting 
Click Here for more information or to order
• Use for high production milling in a variety of exotic materials and for slotting or pocketing difficult-to-cut materials
• Can mill materials between 20 and 45 HRc
• Creates smaller chips than coarse pitch roughing end mills
• Reduces chipping even when milling harder materials

Niagara Cutter Fine Pitch Roughing End Mills - TiN and TiCN Coated - Cobalt - Center Cutting 
Click Here for more information or to order
• Use for high production milling in a wide variety of materials
• Fine pitch design provides you with a better finish than coarse pitch and eliminates chipping in harder materials

Niagara Cutter Fine Pitch Roughing End Mills - Uncoated - Cobalt - Center Cutting 
Click Here for more information or to order
• Use for high production milling in a wide variety of materials
• Fine pitch design provides you with a better finish than coarse pitch and eliminates chipping in harder materials

Niagara Cutter Fine Pitch Roughing End Mills - Uncoated - M-42 8% Cobalt - Non-Center Cutting 
Click Here for more information or to order
• Use for high production milling in a variety of exotic materials and for slotting or pocketing difficult-to-cut materials
• Can mill materials between 20 and 45 HRc
• Creates smaller chips than coarse pitch roughing end mills
• Reduces chipping even when milling harder materials

Niagara Cutter Roughing End Mills - Center Cutting - M-42 8% Cobalt 
Click Here for more information or to order
• Use for plunge cutting to full depth, followed by horizontal feedings

Niagara Cutter Roughing End Mills - Multi-Flute Uncoated - M-42 8% Cobalt - Center Cutting 
Click Here for more information or to order
• Use for plunge cutting to full depth, followed by horizontal feedings

Niagara Cutter Roughing End Mills - TiN Coated - M-42 8% Cobalt - Center Cutting 
Click Here for more information or to order
• Use for plunge cutting to full depth, followed by horizontal feedings

Niagara Cutter Roughing End Mills - TiN Coated and TiCN Coated - Cobalt - Center Cutting 
Click Here for more information or to order
• Use for harder to machine materials
• Fine pitch gives a better finish than the coarse pitch end mills

Niagara Cutter Solid Carbide End Mills TiCN Coated for Non-Ferrous Materials Elite Series Ctr Cut 
Click Here for more information or to order
• 30º Helix
• Maximum metal removal rates
• Optimal feed rates
• Form ground flutes
• True form relieved geometry
• Coarse pitch
• MADE IN USA

Niagara Cutter TiCN Coated Coarse Pitch Roughing End Mills - Center Cutting - M-42 8% Cobalt 
Click Here for more information or to order
• Use for plunge cutting to full depth, followed by horizontal feedings

Niagara Cutter TiCN Coated Coarse Pitch Roughing End Mills - Non-Centering Cutting - M-42 8% Cobalt 
Click Here for more information or to order
• For use where heavy roughing cuts are to be followed with a finishing operation
• Suitable for heavy-duty milling of mild steels, soft to medium-hard steels, stainless steels and non-ferrous metals
• TiCN coating is the ideal choice for cutting extremely abrasive or difficult to cut materials

Niagara Cutter TiCN Coated Fine Pitch Roughing End Mills - M-42 8% Cobalt - Non-Center Cutting 
Click Here for more information or to order
• Use for high production milling in a variety of exotic materials and for slotting or pocketing difficult-to-cut materials
• Can mill materials between 20 and 45 HRc
• Creates smaller chips than coarse pitch roughing end mills
• Reduces chipping even when milling harder materials

Niagara Cutter TiN Coated Coarse Pitch Roughing End Mills - Non-Center Cutting - M-42 8% Cobalt 
Click Here for more information or to order
• For use where heavy roughing cuts are to be followed with a finishing operation
• Suitable for heavy-duty milling of mild steels, soft to medium-hard steels, stainless steels and non-ferrous metals
• TiN coating increases surface hardness and resistance to abrasion to give you increased tool life
• Allows for elevated speeds and feeds and requires less horsepower

Niagara Cutter TiN Coated Fine Pitch Roughing End Mills - Cobalt - Non-Center Cutting 
Click Here for more information or to order
• Use for high production milling in a variety of exotic materials and for slotting or pocketing difficult-to-cut materials
• Can mill materials between 20 and 45 HRc
• Creates smaller chips than coarse pitch roughing end mills
• Reduces chipping even when milling harder materials

Niagara Cutter TiN Coated Fine Pitch Roughing End Mills - M-42 8% Cobalt - Non-Center Cutting 
Click Here for more information or to order
• Use for high production milling in a variety of exotic materials and for slotting or pocketing difficult-to-cut materials
• Can mill materials between 20 and 45 HRc
• Creates smaller chips than coarse pitch roughing end mills
• Reduces chipping even when milling harder materials

Niagara Cutter Truncated Rougher/Finisher End Mills - Multi-Flute - M-42 8% Cobalt 
Click Here for more information or to order
• Use for general purpose roughing of soft to medium hard materials at heavier feed rates
• Ground form relief remains the same even after many resharpenings
• Can be easily resharpened by regrinding radial rake face angle
• Can be run at speeds and feeds close to standard roughing end mills
• Produces narrow, thick chips

OSG Cobalt Roughing and Finishing End Mills
Click Here for more information or to order
  • The Rough and Finish End Mills from OSG allow heavy metal removal rates while, at the same time, provide surface finishes that can eliminate a secondary finish milling operation in many cases. These end mills are designed to be used on a wide variety of materials from aluminum to titanium.
  • A unique nick form reduces friction between the cutting tool and the work-piece resulting in better surface finishes, longer tool life and reduced torque requirements.





Osg Coarse Pitch Roughing End Mills - Uncoated - Non-Center Cutting - M-42 8% Cobalt 
Click Here for more information or to order
• For use where heavy roughing cuts are to be followed with a finishing operation
• Suitable for heavy-duty milling of mild steels, soft to medium hard steels, stainless steels and non-ferrous metals
• Can be run at heavier feed rates with less chatter and vibration
• Requires less horsepower than conventional end mills

OSG Cobalt Roughing End Mills
Click Here for more information or to order
OSG 8% Cobalt End Mills - OSG gives you the accuracy you need by holding shank and mill diameter tolerances to better than ASME standards. With 8% cobalt content in all standard OSG End Mills, you also get premium performance and longer life at no extra cost.

  • Premium 8% cobalt.
  • General purpose rougher for high speed N/C machining operations.
  • Machine non-ferrous as well as more difficult cutting operations in hardened steel up to HRC 30.
  • Weldon shanks.





OSG Cobalt Roughing End Mills - Fine Pitch
Click Here for more information or to order
OSG 8% Cobalt End Mills - OSG gives you the accuracy you need by holding shank and mill diameter tolerances to better than ASME standards. With 8% cobalt content in all standard OSG End Mills, you also get premium performance and longer life at no extra cost.

  • Premium 8% cobalt.
  • Use in high production milling of exotic materials and hard materials ranging from HRC 20 to HRC 45.
  • Produces a smooth finish.
  • Weldon shanks.





Osg EXOTiN® Roughing End Mills - TiN Coated - Coarse Pitch - Powder High Speed Steel 
Click Here for more information or to order
• Use for heavy roughing in stainless steel, titanium, heat-resistant alloys and other exotic materials
• Made from premium grade, superhard powder high speed steel
• TiN coating increases surface hardness and resistance to abrasion for longer tool life
• Facilitates chip flow, reduces friction and galling and allows for elevated feeds and speeds

Osg Fine Pitch Roughing End Mills - M-42 8% Cobalt - Non-Center Cutting 
Click Here for more information or to order
• For use in high production milling in a variety of exotic materials
• Fine pitch design provides a better finish than coarse pitch end mills and eliminates chipping in harder materials
• Coating improves tool life and allows for higher speeds and feeds

Osg Fine Pitch Roughing End Mills - Uncoated - M-42 8% Cobalt - Non-Center Cutting 
Click Here for more information or to order
• For use in high production milling in a variety of exotic materials
• Fine pitch design provides a better finish than coarse pitch end mills and eliminates chipping in harder materials
• Coating improves tool life and allows for higher speeds and feeds

Osg TiCN Coated Fine Pitch Roughing End Mills - M-42 8% Cobalt - Non-Center Cutting 
Click Here for more information or to order
• For use in high production milling in a variety of exotic materials
• Fine pitch design provides a better finish than coarse pitch end mills and eliminates chipping in harder materials
• Coating improves tool life and allows for higher speeds and feeds

Putnam Coarse Pitch Roughing End Mills - Center Cutting - M-42 8% Cobalt 
Click Here for more information or to order
• Excellent for milling operations in hard materials
• For use where heavy roughing cuts are to be followed with a finishing operation

Putnam Coarse Pitch Roughing End Mills - Multi-Flute Uncoated - M-42 8% Cobalt - Center Cutting 
Click Here for more information or to order
• For use where heavy roughing cuts will be followed by a finishing application

Putnam Coarse Pitch Roughing End Mills - Non-Center Cutting - M-42 8% Cobalt 
Click Here for more information or to order
• Excellent for milling operations in hard materials
• For use where heavy roughing cuts are to be followed with a finishing operation

Putnam Coarse Pitch Roughing End Mills - Non-Centering Cutting - M-42 8% Cobalt 
Click Here for more information or to order
• Excellent for milling operations in hard materials
• For use where heavy roughing cuts are to be followed with a finishing operation

Putnam Coarse Pitch Roughing End Mills - TiN Coated - M-42 8% Cobalt - Center Cutting 
Click Here for more information or to order
• Excellent for milling operations in hard materials
• For use where heavy roughing cuts are to be followed with a finishing operation

Putnam Coarse Pitch Roughing End Mills - Uncoated - Non-Center Cutting - M-42 8% Cobalt 
Click Here for more information or to order
• For use where heavy roughing cuts are to be followed with a finishing operation
• Suitable for heavy-duty milling of mild steels, soft to medium hard steels, stainless steels and non-ferrous metals
• Can be run at heavier feed rates with less chatter and vibration
• Requires less horsepower than conventional end mills

Putnam Coated Fine Pitch Roughing End Mills - M-42 8% Cobalt - TiCN and TiN 
Click Here for more information or to order
• Use for high production milling in a wide variety of materials
• Fine pitch design provides you with a better finish than coarse pitch and eliminates chipping in harder materials

Putnam Fine Pitch Roughing End Mills - M-42 8% Cobalt - Non-Center Cutting 
Click Here for more information or to order
• Use for high production milling in a wide variety of materials
• Fine pitch design provides you with a better finish than coarse pitch and eliminates chipping in harder materials

Putnam Fine Pitch Roughing End Mills - Multi-Flute Uncoated - M-42 8% Cobalt - Center Cutting 
Click Here for more information or to order
• Use for high production milling in a wide variety of materials
• Fine pitch design provides you with a better finish than coarse pitch and eliminates chipping in harder materials

Putnam Fine Pitch Roughing End Mills - TiN Coated and TiCN Coated - Cobalt - Center Cutting 
Click Here for more information or to order
• Use for high production milling in a wide variety of materials
• Fine pitch design provides you with a better finish than coarse pitch and eliminates chipping in harder materials

Putnam Fine Pitch Roughing End Mills - Uncoated - M-42 8% Cobalt - Non-Center Cutting 
Click Here for more information or to order
• For use in high production milling in a variety of exotic materials
• Fine pitch design provides a better finish than coarse pitch end mills and eliminates chipping in harder materials
• Coating improves tool life and allows for higher speeds and feeds

Putnam TiCN Coated Coarse Pitch Roughing End Mills - Center Cutting - M-42 8% Cobalt 
Click Here for more information or to order
• Excellent for milling operations in hard materials
• For use where heavy roughing cuts are to be followed with a finishing operation

Putnam TiCN Coated Coarse Pitch Roughing End Mills - Non-Centering Cutting - M-42 8% Cobalt 
Click Here for more information or to order
• For use where heavy roughing cuts are to be followed with a finishing operation
• Suitable for heavy-duty milling of mild steels, soft to medium-hard steels, stainless steels and non-ferrous metals
• TiCN coating is the ideal choice for cutting extremely abrasive or difficult to cut materials

Putnam TiN Coated Coarse Pitch Roughing End Mills - Non-Center Cutting - M-42 8% Cobalt 
Click Here for more information or to order
• For use where heavy roughing cuts are to be followed with a finishing operation
• Suitable for heavy-duty milling of mild steels, soft to medium-hard steels, stainless steels and non-ferrous metals
• TiN coating increases surface hardness and resistance to abrasion to give you increased tool life
• Allows for elevated speeds and feeds and requires less horsepower

Putnam TiN Coated Fine Pitch Roughing End Mills - M-42 8% Cobalt - Non-Center Cutting 
Click Here for more information or to order
• Use for high production milling in a wide variety of materials
• Fine pitch design provides you with a better finish than coarse pitch and eliminates chipping in harder materials

Strasmann Cobalt Roughing Cutters
Click Here for more information or to order
  • 5% Cobalt Super HSS
  • The toughest workhorse of all roughing cutters.
  • The highest quality available, down to the last regrind!

Weldon Crest-Kut 2 Flute - Rough & Finish End Mills
Click Here for more information or to order
  • High speed steel - center cutting.





Weldon Crest-Kut 3 Flute - Rough & Finish End Mills
Click Here for more information or to order
  • High speed steel - center cutting.





Weldon Crest-Kut Multi-Flute - Cobalt - Rough & Finish End Mills
Click Here for more information or to order
  • 8% Cobalt - square end.





Weldon Crest-Kut Multi-Flute - H.S.S. - Rough & Finish End Mills
Click Here for more information or to order
  • High speed steel - single end - center cutting.





XACT 3 Flute Coarse Pitch Roughing End Mills - Center Cutting - M-42 8% Cobalt for Aluminum 
Click Here for more information or to order
• Use for roughing in materials that produce long chips, such as aluminum and aluminum alloys
• These tools also work well in copper and copper alloys, soft steels and thermoplastics
• Features large polished chip spaces and center cutting design

XACT 3 Flute Rougher/Finisher End Mills - M-42 8% Cobalt 
Click Here for more information or to order
• Reduces chatter dramatically
• For maximum performance, reduce feeds by 10%
• Features easy regrinding, longer tool life and less tool deflection

XACT 3 Flute Stub Roughing End Mills - Coarse Pitch - M-42 8% Cobalt - Center Cut 
Click Here for more information or to order
• Center cutting
• Offers higher rigidity than regular length
• Allows increased feeds up to 100%

XACT 3 Flute Stub Roughing End Mills - Coarse Pitch - M-42 8% Cobalt - Center Cutting 
Click Here for more information or to order
• For use where heavy roughing cuts are to be followed with a finishing operation
• Suitable for heavy-duty milling of mild steels, soft to medium-hard steels, stainless steels and non-ferrous metals
• TiN coating increases surface hardness and resistance to abrasion to give you increased tool life
• Allows for elevated speeds and feeds and requires less horsepower

XACT 3 Flute Stub Roughing End Mills - M-42 8% Cobalt and M-42 8% Cobalt TiN Coated 
Click Here for more information or to order
• Center cutting
• Offers higher rigidity than regular length
• Allows increased feeds up to 100%

XACT 3 Flute Stub Roughing End Mills - Non-Center Cutting - M-42 8% Cobalt 
Click Here for more information or to order
• For use where heavy roughing cuts are to be followed with a finishing operation
• Suitable for heavy-duty milling of mild steels, soft to medium-hard steels, stainless steels and non-ferrous metals
• TiN coating increases surface hardness and resistance to abrasion to give you increased tool life
• Allows for elevated speeds and feeds and requires less horsepower

XACT Coarse Pitch Roughing End Mills - M-42 8% Cobalt and M-42 8% Cobalt TiN Coated 
Click Here for more information or to order
• For use where heavy roughing cuts are to be followed with a finishing operation
• Suitable for heavy-duty milling of mild steels, soft to medium hard steels, stainless steels and non-ferrous metals
• Can be run at heavier feed rates with less chatter and vibration
• Requires less horsepower than conventional end mills
• TiN coating increases surface hardness and resistance to abrasion to give you increased tool life

XACT Coarse Pitch Roughing End Mills - Multi-Flute Uncoated - M-42 8% Cobalt - Center Cutting 
Click Here for more information or to order
• For use where heavy roughing cuts will be followed by a finishing application

XACT Coarse Pitch Roughing End Mills - Uncoated - Non-Center Cutting - M-42 8% Cobalt 
Click Here for more information or to order
• For use where heavy roughing cuts are to be followed with a finishing operation
• Suitable for heavy-duty milling of mild steels, soft to medium hard steels, stainless steels and non-ferrous metals
• Can be run at heavier feed rates with less chatter and vibration
• Requires less horsepower than conventional end mills

XACT Fine Pitch 45º 3 Flute Roughing End Mills - M-42 8% Cobalt - Center Cutting 
Click Here for more information or to order
• Use for milling operations in hard materials
• 3 Flute design and 45º high helix aids in chip removal and produces better finishes than coarse pitch design
• IMPORT

XACT Fine Pitch Roughing End Mills - M-42 8% Cobalt - Non-Center Cutting 
Click Here for more information or to order
• For use in high production milling in a variety of exotic materials
• Fine pitch design provides a better finish than coarse pitch end mills and eliminates chipping in harder materials
• Coating improves tool life and allows for higher speeds and feeds

XACT Fine Pitch Roughing End Mills - Multi-Flute Uncoated - M-42 8% Cobalt - Center Cutting 
Click Here for more information or to order
• Use for high production milling in a wide variety of materials
• Fine pitch design provides you with a better finish than coarse pitch and eliminates chipping in harder materials

XACT Fine Pitch Roughing End Mills - TiN Coated and TiCN Coated - Cobalt - Center Cutting 
Click Here for more information or to order
• Use for high production milling in a wide variety of materials
• Fine pitch design provides you with a better finish than coarse pitch and eliminates chipping in harder materials

XACT Fine Pitch Roughing End Mills - Uncoated - M-42 8% Cobalt - Non-Center Cutting 
Click Here for more information or to order
• For use in high production milling in a variety of exotic materials
• Fine pitch design provides a better finish than coarse pitch end mills and eliminates chipping in harder materials
• Coating improves tool life and allows for higher speeds and feeds

XACT Fine Pitch Roughing End Mills - Uncoated and TiN Coated - M-42 8% Cobalt - Non-Center Cutting 
Click Here for more information or to order
• For use in high production milling in a variety of exotic materials
• Fine pitch design provides a better finish than coarse pitch end mills and eliminates chipping in harder materials
• Coating improves tool life and allows for higher speeds and feeds
• IMPORT

XACT Knuckle Roughers M-42 Cobalt
Click Here for more information or to order
  • Made from M-42 premium 8% Cobalt.
  • Available 5 or 6 flute.
  • Tin coating has very good corrosion resistance, heat transmission and excellent wear resistance with a wide range of materials including iron based materials, hardened steels and stainless.
  • TiCN coating offers improved wear resistance to abrasive, adhesive or difficult-to-machine materials such as cast iron, aluminum alloys, tool steels, copper, inconel and titanium alloys.
  • TiAIN coating is a high performance coating which excels at machining of abrasive and difficult-to-machine materials such as cast iron, aluminum alloys, tool steels and nickel alloys.





XACT M42 Cobalt Roughing End Mills
Click Here for more information or to order





XACT TiCN Coated Coarse Pitch Roughing End Mills - Center Cutting - M-42 8% Cobalt 
Click Here for more information or to order

XACT TiCN Coated Coarse Pitch Roughing End Mills - Non-Centering Cutting - M-42 8% Cobalt 
Click Here for more information or to order
• For use where heavy roughing cuts are to be followed with a finishing operation
• Suitable for heavy-duty milling of mild steels, soft to medium-hard steels, stainless steels and non-ferrous metals
• TiCN coating is the ideal choice for cutting extremely abrasive or difficult to cut materials

XACT TiN Coated Coarse Pitch Roughing End Mills - Coarse Pitch - M-42 8% Cobalt - Center Cutting 
Click Here for more information or to order
• Center cutting
• Offers higher rigidity than regular length
• Allows increased feeds up to 100%

XACT TiN Coated Coarse Pitch Roughing End Mills - Non-Center Cutting - M-42 8% Cobalt 
Click Here for more information or to order
• For use where heavy roughing cuts are to be followed with a finishing operation
• Suitable for heavy-duty milling of mild steels, soft to medium-hard steels, stainless steels and non-ferrous metals
• TiN coating increases surface hardness and resistance to abrasion to give you increased tool life
• Allows for elevated speeds and feeds and requires less horsepower

XACT TiN Coated Fine Pitch Roughing End Mills - M-42 8% Cobalt - Non-Center Cutting 
Click Here for more information or to order
• For use in high production milling in a variety of exotic materials
• Fine pitch design provides a better finish than coarse pitch end mills and eliminates chipping in harder materials
• Coating improves tool life and allows for higher speeds and feeds

XACT TiN Coated Fine Pitch Roughing End Mills continued - M-42 8% Cobalt - Non-Center Cutting 
Click Here for more information or to order
• For use in high production milling in a variety of exotic materials
• Fine pitch design provides a better finish than coarse pitch end mills and eliminates chipping in harder materials
• Coating improves tool life and allows for higher speeds and feeds

XACT USA Made CPM-4 Roughing End Mills - Regular Length - Super Tungsten Vanadium 
Click Here for more information or to order
• Ideal in abrasive and difficult-to-machine materials
• 4% Vanadium provides high edge hardness and longer tool life
• For use where heavy roughing cuts are to be followed by a finishing operation
• Large core diameter provides rigidity and reduces deflection
• MADE IN USA


Servicing Industry Since 1968

Have a Question or Need Technical Assistance? For Personal Service Click Here to contact a NSS dealer for your state.