Cutting Tools - Broaches

Dumont - Metric - HSS Keyseating Broaches - Type AF  Click Here for more information or to order	• Use with Davis models 4, 5, 15 or similar machines • Range is 1/16" to 1" and 2mm to 25mm • Features superior tooth design, ground to precision keyway tolerances • Available in sizes for cutting the most common keyway widths - metric sizes also available

Dumont - One-Pass Keyway Broaches - HSS Keyseating Broaches - Type AF  Click Here for more information or to order	• Designed for smaller production runs (up to several hundred) of identical keyways in varying bores • No shims required • C style bushings are required

Dumont - Production Keyway Broaches - HSS Keyseating Broaches - Type AF  Click Here for more information or to order	• Designed for large production runs of identical keyways with identical bores • No shims or busings required

Dumont Broaches - Hexagon Push Broaches - High Speed Steel  Click Here for more information or to order	*Based on mild steel **Tolerance - Basic minus .0005" - .001"

Dumont Broaches - Metric Square Push Broaches - High Speed Steel  Click Here for more information or to order	Range 4mm to 14mm square

Dumont Broaches - Square Push Broaches - High Speed Steel  Click Here for more information or to order	*Based on mild steel **Tolerance - Basic minus .001"

Dumont High Production Broaches - American Standard - High Speed Steel Keyseating Broaches - Type AF  Click Here for more information or to order	• Use with Davis models 4, 5, 15 or similar machines • Range is 1/16" to 1" and 2mm to 25mm • Features superior tooth design, ground to precision keyway tolerances • Available in sizes for cutting the most common keyway widths - metric sizes also available

Dumont Keyway Broaches - High Speed Steel  Click Here for more information or to order	• The simplest and most economical way to cut a keyway is with the standard keyway broach, bushing and shim using a shop arbor press • The shim used on the second (or additional) pass simply compensates for the amount of material removed on the first pass and allows you to produce a short keyway broach that will fit under most arbor presses • All required shims are provided for except 1-3/8" and 1-1/2" sizes

Dumont Keyway Bushings - “A” Bushings for “A” Broaches - Keyway Bushings  Click Here for more information or to order	Keyway bushings enable the operator to use individual keyway broaches in a variety of bore sizes. Both bushings and keyway broaches are designated by a letter which signifies the width of the keyway broach and bushing opening. For proper fit use bushings with the same letter designation as the broach being used .i.e. A Bushings with A Broaches, B Bushings with B Broaches, etc. A,B AND C AVAILABLE IN D AND E BUSHINGS IN PLAIN ONLY.

Dumont Keyway Bushings - “A” Bushings for “A” Broaches  Click Here for more information or to order	• Keyway bushings allow you to use individual keyway broaches in a variety of bore sizes • Both bushings and keyway broaches are designated by a letter which signifies the width of the keyway broach and bushing opening. • For proper fit, use bushings with the same letter designation as the broach being used, i.e. A Bushings with A Broaches, B Bushings with B Broaches, etc. • A, B and C AVAILABLE IN COLLARED ONLY • D and E BUSHINGS AVAILABLE IN PLAIN ONLY

Dumont Keyway Bushings - “B” Bushings for “B” Broaches - Keyway Bushings  Click Here for more information or to order	Keyway bushings enable the operator to use individual keyway broaches in a variety of bore sizes. Both bushings and keyway broaches are designated by a letter which signifies the width of the keyway broach and bushing opening. For proper fit use bushings with the same letter designation as the broach being used .i.e. A Bushings with A Broaches, B Bushings with B Broaches, etc. A,B AND C AVAILABLE IN D AND E BUSHINGS IN PLAIN ONLY.

Dumont Keyway Bushings - “B” Bushings for “B” Broaches  Click Here for more information or to order	• Keyway bushings allow you to use individual keyway broaches in a variety of bore sizes • Both bushings and keyway broaches are designated by a letter which signifies the width of the keyway broach and bushing opening. • For proper fit, use bushings with the same letter designation as the broach being used, i.e. A Bushings with A Broaches, B Bushings with B Broaches, etc. • A, B and C AVAILABLE IN COLLARED ONLY • D and E BUSHINGS AVAILABLE IN PLAIN ONLY

Dumont Keyway Bushings - “C” Bushings for “C” Broaches - Keyway Bushings  Click Here for more information or to order	Keyway bushings enable the operator to use individual keyway broaches in a variety of bore sizes. Both bushings and keyway broaches are designated by a letter which signifies the width of the keyway broach and bushing opening. For proper fit use bushings with the same letter designation as the broach being used .i.e. A Bushings with A Broaches, B Bushings with B Broaches, etc. A,B AND C AVAILABLE IN D AND E BUSHINGS IN PLAIN ONLY.

Dumont Keyway Bushings - “C” Bushings for “C” Broaches  Click Here for more information or to order	• Keyway bushings allow you to use individual keyway broaches in a variety of bore sizes • Both bushings and keyway broaches are designated by a letter which signifies the width of the keyway broach and bushing opening. • For proper fit, use bushings with the same letter designation as the broach being used, i.e. A Bushings with A Broaches, B Bushings with B Broaches, etc. • A, B and C AVAILABLE IN COLLARED ONLY • D and E BUSHINGS AVAILABLE IN PLAIN ONLY

Dumont Keyway Bushings - “D” Bushings for “D” Broaches - Keyway Bushings  Click Here for more information or to order	Keyway bushings enable the operator to use individual keyway broaches in a variety of bore sizes. Both bushings and keyway broaches are designated by a letter which signifies the width of the keyway broach and bushing opening. For proper fit use bushings with the same letter designation as the broach being used .i.e. A Bushings with A Broaches, B Bushings with B Broaches, etc. A,B AND C AVAILABLE IN D AND E BUSHINGS IN PLAIN ONLY.

Dumont Keyway Bushings - “D” Bushings for “D” Broaches  Click Here for more information or to order	• Keyway bushings allow you to use individual keyway broaches in a variety of bore sizes • Both bushings and keyway broaches are designated by a letter which signifies the width of the keyway broach and bushing opening. • For proper fit, use bushings with the same letter designation as the broach being used, i.e. A Bushings with A Broaches, B Bushings with B Broaches, etc. • A, B and C AVAILABLE IN COLLARED ONLY • D and E BUSHINGS AVAILABLE IN PLAIN ONLY

Dumont Keyway Bushings - “E” Bushings for “E” Broaches - Keyway Bushings  Click Here for more information or to order	Keyway bushings enable the operator to use individual keyway broaches in a variety of bore sizes. Both bushings and keyway broaches are designated by a letter which signifies the width of the keyway broach and bushing opening. For proper fit use bushings with the same letter designation as the broach being used .i.e. A Bushings with A Broaches, B Bushings with B Broaches, etc. A,B AND C AVAILABLE IN D AND E BUSHINGS IN PLAIN ONLY.

Dumont Keyway Bushings - “E” Bushings for “E” Broaches  Click Here for more information or to order	• Keyway bushings allow you to use individual keyway broaches in a variety of bore sizes • Both bushings and keyway broaches are designated by a letter which signifies the width of the keyway broach and bushing opening. • For proper fit, use bushings with the same letter designation as the broach being used, i.e. A Bushings with A Broaches, B Bushings with B Broaches, etc. • A, B and C AVAILABLE IN COLLARED ONLY • D and E BUSHINGS AVAILABLE IN PLAIN ONLY

Dumont Metric Bushings - “A” Bushings for “A” Broaches - Metric Bushings  Click Here for more information or to order	Keyway bushings enable the operator to use individual keyway broaches in a variety of bore sizes. Both bushings and keyway broaches are designated by a letter which signifies the width of the keyway broach and bushing opening. For proper fit use bushings with the same letter designation as the broach being used - i.e. A Bushings with A Broaches. B-1 Bushings for B-1 Broaches, etc. A,B & C AVAILABLE IN COLLARED ONLY. D & E BUSHINGS IN PLAIN ONLY.

Dumont Metric Bushings - “B-1” Bushings for “B-1” Broaches - Metric Bushings  Click Here for more information or to order	Keyway bushings enable the operator to use individual keyway broaches in a variety of bore sizes. Both bushings and keyway broaches are designated by a letter which signifies the width of the keyway broach and bushing opening. For proper fit use bushings with the same letter designation as the broach being used - i.e. A Bushings with A Broaches. B-1 Bushings for B-1 Broaches, etc. A,B & C AVAILABLE IN COLLARED ONLY. D & E BUSHINGS IN PLAIN ONLY.

Dumont Metric Bushings - “C” Bushings for “C” Broaches - Metric Bushings  Click Here for more information or to order	Keyway bushings enable the operator to use individual keyway broaches in a variety of bore sizes. Both bushings and keyway broaches are designated by a letter which signifies the width of the keyway broach and bushing opening. For proper fit use bushings with the same letter designation as the broach being used - i.e. A Bushings with A Broaches. B-1 Bushings for B-1 Broaches, etc. A,B & C AVAILABLE IN COLLARED ONLY. D & E BUSHINGS IN PLAIN ONLY.

Dumont Metric Bushings - “D” Bushings for “D” Broaches - Metric Bushings  Click Here for more information or to order	Keyway bushings enable the operator to use individual keyway broaches in a variety of bore sizes. Both bushings and keyway broaches are designated by a letter which signifies the width of the keyway broach and bushing opening. For proper fit use bushings with the same letter designation as the broach being used - i.e. A Bushings with A Broaches. B-1 Bushings for B-1 Broaches, etc. A,B & C AVAILABLE IN COLLARED ONLY. D & E BUSHINGS IN PLAIN ONLY.

Dumont Metric Bushings - “E” Bushings for “E” Broaches - Metric Bushings  Click Here for more information or to order	Keyway bushings enable the operator to use individual keyway broaches in a variety of bore sizes. Both bushings and keyway broaches are designated by a letter which signifies the width of the keyway broach and bushing opening. For proper fit use bushings with the same letter designation as the broach being used - i.e. A Bushings with A Broaches. B-1 Bushings for B-1 Broaches, etc. A,B & C AVAILABLE IN COLLARED ONLY. D & E BUSHINGS IN PLAIN ONLY.

Dumont Metric Keyway Broaches - Extra Shims - High Speed Steel  Click Here for more information or to order	• To cut a keyway use the standard keyway broach, bushing and shim using a shop arbor press • The shim used on the second (or additional) pass compensates for the amount of material removed on the first pass and allows you to produce a short keyway broach that will fit under most arbor presses • All required shims are provided

Dumont Metric Keyway Broaches - High Speed Steel  Click Here for more information or to order	• To cut a keyway use the standard keyway broach, bushing and shim using a shop arbor press • The shim used on the second (or additional) pass compensates for the amount of material removed on the first pass and allows you to produce a short keyway broach that will fit under most arbor presses • All required shims are provided

Dumont Metric Keyway Bushings - “A” Bushings for “A” Broaches  Click Here for more information or to order	• Keyway bushings allow you to use individual keyway broaches in a variety of bore sizes • Both bushings and keyway broaches are designated by a letter which signifies the width of the keyway broach and bushing opening • For proper fit, use bushings with the same letter designation as the broach being used - i.e. A Bushings with A Broaches, B-1 Bushings with B-1 Broaches, etc. • A, B-1 AND C AVAILABLE IN COLLARED ONLY • D AND E BUSHINGS AVAILABLE IN PLAIN ONLY

Dumont Metric Keyway Bushings - “B-1” Bushings for “B-1” Broaches  Click Here for more information or to order	• Keyway bushings allow you to use individual keyway broaches in a variety of bore sizes • Both bushings and keyway broaches are designated by a letter which signifies the width of the keyway broach and bushing opening • For proper fit, use bushings with the same letter designation as the broach being used - i.e. A Bushings with A Broaches, B-1 Bushings with B-1 Broaches, etc. • A, B-1 AND C AVAILABLE IN COLLARED ONLY • D AND E BUSHINGS AVAILABLE IN PLAIN ONLY

Dumont Metric Keyway Bushings - “C” Bushings for “C” Broaches  Click Here for more information or to order	• Keyway bushings allow you to use individual keyway broaches in a variety of bore sizes • Both bushings and keyway broaches are designated by a letter which signifies the width of the keyway broach and bushing opening • For proper fit, use bushings with the same letter designation as the broach being used - i.e. A Bushings with A Broaches, B-1 Bushings with B-1 Broaches, etc. • A, B-1 AND C AVAILABLE IN COLLARED ONLY • D AND E BUSHINGS AVAILABLE IN PLAIN ONLY

Dumont Metric Keyway Bushings - “D” Bushings for “D” Broaches  Click Here for more information or to order	• Keyway bushings allow you to use individual keyway broaches in a variety of bore sizes • Both bushings and keyway broaches are designated by a letter which signifies the width of the keyway broach and bushing opening • For proper fit, use bushings with the same letter designation as the broach being used - i.e. A Bushings with A Broaches, B-1 Bushings with B-1 Broaches, etc. • A, B-1 AND C AVAILABLE IN COLLARED ONLY • D AND E BUSHINGS AVAILABLE IN PLAIN ONLY

Dumont Metric Keyway Bushings - “E” Bushings for “E” Broaches  Click Here for more information or to order	• Keyway bushings allow you to use individual keyway broaches in a variety of bore sizes • Both bushings and keyway broaches are designated by a letter which signifies the width of the keyway broach and bushing opening • For proper fit, use bushings with the same letter designation as the broach being used - i.e. A Bushings with A Broaches, B-1 Bushings with B-1 Broaches, etc. • A, B-1 AND C AVAILABLE IN COLLARED ONLY • D AND E BUSHINGS AVAILABLE IN PLAIN ONLY

Hassay Savage Keyway Broaches - High Speed Steel Click Here for more information or to order

XACT Keyway Broaches - High Speed Steel  Click Here for more information or to order	• The simplest and most economical way to cut a keyway is with the standard keyway broach, bushing and shim using a shop arbor press • The shim used on the second (or additional) pass simply compensates for the amount of material removed on the first pass and allows you to produce a short keyway broach that will fit under most arbor presses • All required shims are provided for except 1-3/8" and 1-1/2" sizes

XACT Metric Keyway Broaches - High Speed Steel  Click Here for more information or to order	• To cut a keyway use the standard keyway broach, bushing and shim using a shop arbor press • The shim used on the second (or additional) pass compensates for the amount of material removed on the first pass and allows you to produce a short keyway broach that will fit under most arbor presses • All required shims are provided

XACT Push Broaches - Hexagon Push Broaches - High Speed Steel  Click Here for more information or to order	• IMPORT

XACT Push Broaches - Square Push Broaches - High Speed Steel  Click Here for more information or to order	• IMPORT