Search:

View Janitorial Products Index

Click Here for Ordering Instructions and Shipping Information

MRO Pictorial Index

Abrasives



Cutting Tools



Indexable Cutting Tools




Fasteners, Metals & Plastics



Fluids & Lubricants



Hand Tools



Machinery & Accessories



Material Handling



Power Tools



Precision Tools



Safety



Shop Supplies



Toolholding & Workholding



Tooling Components



Abrasives - Discs - Quick Change


3M ™ Disc Pad Face Plates 
Click Here for more information or to order
• Ribbed plates result in cooler running discs
• Use harder face plates for heavier stock removal applications

3M ™ Flexible Diamond Products Hookit™ Finishing Pencil w/Flexible Diamond Discs 
Click Here for more information or to order
• Use with accompanying diamond discs for spot repair and defect removal on hard to reach and contoured surfaces
• Great for dies, molds, carbide tools, ceramics, composites and more
Includes:
• 1 Each of the 3M Hookit finishing pencils
• 1/2" Flexible diamond QRS discs. 3 of each grade of M-125, M-74, M-40, M-20 and M-10

3M ™ Flexible Diamond Products Quick Release Diamond Discs Flex-Diamond Roloc™ Intro Kits 
Click Here for more information or to order
• Great for finishing hard to grind materials like ceramics, composites, sculptured glass, carbide, stone, marble, and fiberglass
• Excellent for polishing dies and molds
• Provides you with aggressive and clean cutting action
• Grade changes are quick and easy! Just attach to a soft hook type loop backup pad using the Roloc attachment system
Each Introductory Kit Includes:
• 1 Each diamond discs in micron sizes: M-250, M-125, M-74, M-40, M-20, and M-10
• 1 Hook and loop backup pad
• 1 Roloc disc pad
• 1 Threaded shaft for disc pad

3M ™ Microfinishing Film - 5" Hookit™ II Style Discs - ™ 366L Imperial™ 
Click Here for more information or to order
50 pc. pkgs.

• For exceptional finishes in dry sanding applications on wood, fiberglass, gel coats, painted surfaces, soft metals, and solid surface materials
• Top quality finishes and good loading resistance
• Competitive cut rates and long life

3M ™ Roloc™ Disc Pads 
Click Here for more information or to order
• For use with 3M Roloc Grinding Discs
• Rubber back-up pads are available in different degrees of hardness for varying grinding
and finishing applications
• Pads are female threaded to receive any standard 1/4" - 20 threaded shaft
Note: Must order shaft separately

3M ™ Roloc™ Quick-Change Disc Pads 
Click Here for more information or to order
• For use with 3M Roloc™ grinding discs
• Available in different degrees of hardness for varying grinding and finishing applications
• Pads are female threaded to receive any standard 1/4" - 20 threaded shaft

3M ™ Roloc™ Quick-Change Discs - Coated Resin Bond Disc Buttons - TP Disc Pads 
Click Here for more information or to order
• Refer to grit and color code chart below

3M ™ Roloc™ Quick-Change Discs - TP Discs 
Click Here for more information or to order
• Use with 3M - TP Disc Pads • Interchangeable with Merit press-on type discs

3M ™ Roloc™ Quick-Change Discs - TS Disc Pads 
Click Here for more information or to order
• Use with 3M - TS Discs
• Interchangable with standard screw-on type discs and holders
• Must order shaft separately

3M ™ Roloc™ Quick-Change Discs - TS Discs 
Click Here for more information or to order
• Use with 3M - TS Disc Pads • Interchangeable with standard screw-on type discs

3M ™ Roloc™ Quick-Change Discs 
Click Here for more information or to order
• Provides you with a fast, effective method for deburring, blending, finishing, removing tool marks and die polishing on all types of metals
• Locks securely in place with just a half twist
• Resists loading under severe conditions
• Ideal for right angle or straight shaft air tools, and on flexible shaft grinders
• Available in 3 different types of fastening systems to accommodate the most popular styles

3M ™ Scotch-Brite™ Bench Area Products - ™ Roloc™ + Quick-Change Holder System 
Click Here for more information or to order
3M offers a wide range of fully interchangeable products for grinding, deburring, cleaning, blending and finishing of flat and irregular surfaces and hard-to-reach areas.
• Use on both ferrous and non-ferrous materials
• Available in both 1/4" shank or Roloc + Quick-Change threaded shanks

Ferro Industries Sanding Pads - Heavy-Duty Production Pad 
Click Here for more information or to order
• 7" Pad is designed for fiber resin discs
• 5/8" - 11" Threaded hub
• Includes retaining nut

Ferro Industries Sanding Pads - Heavy-Duty Production Pads 
Click Here for more information or to order
• Great to use on all dual action and random orbital tools

Merit Abrasives Quick-Change Buffing Discs - Type II and Type III Fasteners 
Click Here for more information or to order
• A non-woven nylon fibre impregnated with abrasive and laminated to power-lock nylon backing
• Permits higher grinding speeds without fly-offs
• Produces a consistently uniform finish
• Type II and type III features a turn-on / turn off and roll-on style fasteners to be used with holder pads

Merit Abrasives Quick-Change Discs - Type II Quick-Change Discs - Turn-On Metal Fastener 
Click Here for more information or to order
Aluminum Oxide
• General purpose
• All around grinding and deburring and blending

Merit Abrasives Quick-Change Discs - Type III Quick-Change Discs - Roll-On / Roll-Off 
Click Here for more information or to order
Aluminum Oxide
• General purpose
• All around grinding and deburring and blending

Merit Abrasives Quick-Change Surface Preparation Discs - Type II and Type III Fasterners 
Click Here for more information or to order
• Reinforced non-woven nylon backing
• More rigid and aggressive than buffing discs
• Recommended for removing heavy rust and oxidation and blending machine marks
• Type II and type III features a turn-on / turn-off and roll-on style fasteners to be used with same style holder pads

Norton AVOS Grinding System - "The See Thru System" - 4-1/2"
Click Here for more information or to order
  • Revolutionary patented system allows view of surface while grinding.
  • Plus the unique triangular shape allows the edge of the material to be viewed while being ground.
  • Available in Bear-Tex (coarse, medium or very fine) or Fibre discs in Norton SG, Norzon Zirconia Alumina, or Metalite Aluminum Oxide.

  • AVOS fibre discs are good for grinding welds, steels and surface preparation.
  • AVOS Bear-Tex discs remove grind lines, rust, scale and parting lines.

Must be ordered in standard package quantity of 10 pieces




Norton AVOS Grinding System - "The See Thru System" - 5"
Click Here for more information or to order
  • Revolutionary patented system allows view of surface while grinding.
  • Plus the unique triangular shape allows the edge of the material to be viewed while being ground.
  • Available in Bear-Tex (coarse, medium or very fine) or Fibre discs in Norton SG, Norzon Zirconia Alumina, or Metalite Aluminum Oxide.

  • AVOS fibre discs are good for grinding welds, steels and surface preparation.
  • AVOS Bear-Tex discs remove grind lines, rust, scale and parting lines.

Must be ordered in standard package quantity of 40 pieces Back-up pads: 5/standard package.




Norton AVOS Grinding System - "The See Thru System" - 7"
Click Here for more information or to order
  • Revolutionary patented system allows view of surface while grinding.
  • Plus the unique triangular shape allows the edge of the material to be viewed while being ground.
  • Available in Bear-Tex (coarse, medium or very fine) or Fibre discs in Norton SG, Norzon Zirconia Alumina, or Metalite Aluminum Oxide.

  • AVOS fibre discs are good for grinding welds, steels and surface preparation.
  • AVOS Bear-Tex discs remove grind lines, rust, scale and parting lines.

Must be ordered in standard package quantity of 10 pieces




Norton AVOS Grinding System - Trial Kits
Click Here for more information or to order
6 Discs (3 different grits) and 5" back-up pad
  • Revolutionary patented system allows view of surface while grinding.
  • Plus the unique triangular shape allows the edge of the material to be viewed while being ground.
  • Available in Bear-Tex (coarse, medium or very fine) or Fibre discs in Norton SG, Norzon Zirconia Alumina, or Metalite Aluminum Oxide.

  • AVOS fibre discs are good for grinding welds, steels and surface preparation.
  • AVOS Bear-Tex discs remove grind lines, rust, scale and parting lines.





Norton Back-Up Pads - 5/8" - 11 Threaded - Air-Cooled Rubber 
Click Here for more information or to order

Norton Back-Up Pads - Molded Rubber 
Click Here for more information or to order

Norton Quick-Change Discs and Accessories - Speed-Lok TR Discs - Fits Speed-Lok TR Back-Up Pads 
Click Here for more information or to order

Norton Quick-Change Discs and Accessories - Speed-Lok TS Back-Up Pads 
Click Here for more information or to order

Norton Quick-Change Discs and Accessories - Speed-Lok TS Discs - Fits Speed-Lok TS Back-Up Pads 
Click Here for more information or to order

Quick-Change Surface Preparation Discs - Type II and Type III Fasterners 
Click Here for more information or to order
• Reinforced non-woven nylon backing
• More rigid and aggressive than buffing discs
• Recommended for removing heavy rust and oxidation and blending machine marks
• Type II and type III features a turn-on / turn-off and roll-on style fasteners to be used with same style holder pads

Shur-Brite and Shur-Kut Disc Kits
Click Here for more information or to order
Shur-Brite Kit Includes
  • 15 Of the most popular Shur-Brite« quick change discs, type "S".
  • Contains 5 Each: Surface conditioning discs in coarse, medium and very fine grit.
  • Contains 1 Each: Medium density holder with 1/4" shank.

Shur-Kut Kit Includes
  • 20 Of the most popular Shur-Kut« quick change discs, type "S".
  • Contains 5 Each: Surface conditioning discs in A/O 36, 60, 80 and 120 grit.
  • Contains 1 Each: Medium density holder with 1/4" shank

Spiralcool Disc Pad Face Plates - Accessories 
Click Here for more information or to order
• Ribbed face plates assure cooler running discs
• Higher pressure on the ribbed sections provides you with prolonged disc life

Standard Abrasives Quick Change Backup Pads - ClickOn
Click Here for more information or to order
  • Available in SocAtt, Lockit and ClickOn styles.
  • Molded rubber back-up pads offer firm support, while providing quick-change convenience.
  • Fast locking devices securely anchor the discs to the back-up pads.
  • A 1/4" steel shank permits speedy mounting in portable tool chucks.





Standard Abrasives Quick Change Backup Pads - Lockit
Click Here for more information or to order
  • Available in SocAtt, Lockit and ClickOn styles.
  • Molded rubber back-up pads offer firm support, while providing quick-change convenience.
  • Fast locking devices securely anchor the discs to the back-up pads.
  • A 1/4" steel shank permits speedy mounting in portable tool chucks.





Standard Abrasives Quick Change Backup Pads - SocAtt
Click Here for more information or to order
  • Available in SocAtt, Lockit and ClickOn styles.
  • Molded rubber back-up pads offer firm support, while providing quick-change convenience.
  • Fast locking devices securely anchor the discs to the back-up pads.
  • A 1/4" steel shank permits speedy mounting in portable tool chucks.





Standard Abrasives Quick Change Laminated Discs - ClickOn - A/O
Click Here for more information or to order
  • ClickOn features a snap-on/snap-off nylon fastening hub.





Standard Abrasives Quick Change Laminated Discs - ClickOn - Zirconia
Click Here for more information or to order
  • ClickOn features a snap-on/snap-off nylon fastening hub.
  • POWER ZIRC 2 PLY DISCS BEST DISC FOR: Rapid stock removal on stainless steel. Utilizes a Y weight cloth backing, with a fused Zirconium grain and lubricated super-size coating.





Standard Abrasives Quick Change Laminated Discs - Lockit - A/O
Click Here for more information or to order
  • Lockit« features a common nylon threaded screw-type hub.





Standard Abrasives Quick Change Laminated Discs - Lockit - Zirconia
Click Here for more information or to order
  • Lockit« features a common nylon threaded screw-type hub.
  • POWER ZIRC 2 PLY DISCS BEST DISC FOR: Rapid stock removal on stainless steel. Utilizes a Y weight cloth backing, with a fused Zirconium grain and lubricated super-size coating.





Standard Abrasives Quick Change Laminated Discs - SocAtt - A/O
Click Here for more information or to order
  • SocAtt« features an all- metal attachment on the holder pad and disc.





Standard Abrasives Quick Change Laminated Discs - SocAtt - Zirconia
Click Here for more information or to order
  • SocAtt« features an all- metal attachment on the holder pad and disc.
  • POWER ZIRC 2 PLY DISCS BEST DISC FOR: Rapid stock removal on stainless steel. Utilizes a Y weight cloth backing, with a fused Zirconium grain and lubricated super-size coating.





Standard Abrasives Quick Change Surface Conditioning Discs - ClickOn - A/O
Click Here for more information or to order
QUICK CHANGE DISCS, ALUMINUM OXIDE (A/O), FE

Features:
  • FE material is very flexible, with high edge durability.
  • FE provides a high initial and extended rate of cut.
  • Performs well on flat and contoured surfaces.
  • Ideal on a variety of deburring, blending and cleaning applications.
  • ClickOn features a snap-on/snap-off nylon fastening hub..
Maximum RPM
1" - 12,000 - 20,000
1-1/2" - 12,000 - 20,000
2" - 12,000 - 20,000
3" - 10,000 - 18,000





Standard Abrasives Quick Change Surface Conditioning Discs - Lockit - A/O
Click Here for more information or to order
QUICK CHANGE DISCS, ALUMINUM OXIDE (A/O), FE

Features:
  • FE material is very flexible, with high edge durability.
  • FE provides a high initial and extended rate of cut.
  • Performs well on flat and contoured surfaces.
  • Ideal on a variety of deburring, blending and cleaning applications.
  • Lockit« features a common nylon threaded screw-type hub.
Maximum RPM
1" - 12,000 - 20,000
1-1/2" - 12,000 - 20,000
2" - 12,000 - 20,000
3" - 10,000 - 18,000





Standard Abrasives Quick Change Surface Conditioning Discs - SocAtt - A/O
Click Here for more information or to order
QUICK CHANGE DISCS, ALUMINUM OXIDE (A/O), FE

Features:
  • FE material is very flexible, with high edge durability.
  • FE provides a high initial and extended rate of cut.
  • Performs well on flat and contoured surfaces.
  • Ideal on a variety of deburring, blending and cleaning applications.
  • SocAtt« features an all- metal attachment on the holder pad and disc.
Maximum RPM
1" - 12,000 - 20,000
1-1/2" - 12,000 - 20,000
2" - 12,000 - 20,000
3" - 10,000 - 18,000





Standard Abrasives Type 27 Unitized Discs
Click Here for more information or to order
  • 4-1/2" Dia. x 7/8" arbor hole.
  • Designed to fit most 4-1/2" grinders.
  • Unique design offers material removal while imparting a final finish.
  • For deburring, edge breaking, blending, cleaning, finishing and polishing applications.





XACT USA Made Shur-Kut® Flex Discs - Quick-Change System 
Click Here for more information or to order
• Breakthrough design allows flaps to
conform to curved surface
• Excellent for blending and contouring
• Provides consistent high stock
removal rates
• Flaps extend beyond edge of disc
• Less heat buildup to do flap spacing
• Longlife and consistent finish
• Aluminum Oxide and
Zirconium Alumina
• Sold in package quantities only

XACT USA Made Shur-Kutź Quick-Change Discs - Quick-Change System 
Click Here for more information or to order
Interchangeable with Norton ˘Speed-Lok÷ Standard ˘Quick-Change÷
• MADE IN USA


Servicing Industry Since 1968

Have a Question or Need Technical Assistance? For Personal Service Click Here to contact a NSS dealer for your state.